Loading ...
Loading ...
Loading ...
GMT980 IB-17443_9-30-21.indd 2
• If you are looking for an ultra-close fi nish, you
can use the trimmer without the comb guide.
This will give you an extremely short cut.
IMPORTANT: Please note that when using
the trimmer without the comb guide, the cutting
length will be below 0.4mm. The length setting
shown on the LCD screen will no longer be
relevant when the comb guide is detached.
STUBBLE TRIM BEST TIPS
• Use on clean, dry hair.
• If possible, when using for the fi rst time,
try to grow your facial hair for a few days before
cutting so you can trim down to a level that is
best for you.
• Set the cutting length as desired.
• It is always best to start cutting with a longer
length fi rst, then trim again if the length is
longer than desired.
• Hold the trimmer against the hair. The teeth of
the comb guide should be pointing upward and
should be fl at against the face.
• Move the trimmer upward through the hair, a
little at a time, against the direction of hair
growth. The fl oating and contouring head will
follow the curves of your face to ensure both
accuracy and comfort.
• The trimmer will work most effectively
when cutting through the hair at its own
speed – never force it through the hair.
You may experience a little resistance when
trimming the neck area, where hair is thicker
and grows in many different directions. This is
completely normal. Just like when shaving, extra
time should be given when trimming under the
neck area.
• Never switch the trimmer off while in
the hair.
CLEANING & MAINTENANCE
• Regular cleaning will maintain the high
performance of your trimmer.
• Before cleaning or maintenance, switch off
and remove the power cord if connected.
• Detach the comb guide by gently lifting the
front of the comb guide from both sides and
fl ipping it over to the back of the unit. Lock it
into position by clicking it securely onto the
fastener on the back of the handle.
• Use the cleaning brush supplied to brush away
any hair and debris. Do not use a sharp object to
clean the trimmer blade.
• The blades can be removed to aid cleaning.
• To remove the blades, hold the handle of the
trimmer with one hand, place your thumb
underneath the blades and push the blades
away from the handle.
• Gently blow away any hair trapped beneath
the blades.
• The blades can be rinsed under the tap.
After rinsing, the blades may need to be oiled.
See oiling instructions that follow.
• Be sure the blades are dry before reattaching
to the trimmer body.
• Be sure to clean the blades after each use and
before storing.
• It is highly recommended to oil the blades once a
month. This ensures optimum cutting performance.
Also, oil the blades before you use the trimmer for
the fi rst time. To oil the blades, make sure the unit
is switched on. Gently squeeze the oil tube and
apply 1 or 2 drops of oil onto the blades. Leave the
unit on for a few seconds more to allow the oil to
thoroughly spread along the length of the blades.
Switch the unit off and remove any excess oil by
gently dabbing with a cloth.
BATTERY DISPOSAL
This appliance contains a nickel metal hydride
battery. To protect the environment, this
appliance and its battery must be disposed of
safely. At the end of its life, please take this
appliance to a recycling center, where the
internal rechargeable battery should be removed
by a professional and recycled separately. For
more information about the recycling of
electrical and battery-operated appliances,
please contact your local council offi ce or your
household waste disposal service. For specifi c
enquiries regarding the replacement of batteries
in this product, please contact our Conair
Consumer Care Line.
CONTAINS NICKEL METAL HYDRIDE
BATTERIES. MUST BE COLLECTED,
RECYCLED OR DISPOSED OF
PROPERLY. DO NOT DISPOSE OF
IN THE MUNICIPAL WASTE.
Loading ...
Loading ...
Loading ...