Loading ...
Loading ...
Loading ...
Installation location
DO NOT install the dryer:
outdoors
in an environment with dripping
water,
near flammable materials,
in rooms which are at risk of frost,
in rooms which may contain gas
or other fuels,
in cupboards with Iockable doors
or in alcoves.
with other fuel-burning appliances
in the same closet.
The installation room must be well
ventilated, otherwise the dryer will
operate below optimum performance.
Do not operate the dryer at
temperatures above 104°F (40°C) or
below 41 °F (5°C). Low temperatures
affect the automatic program sequence
and may prolong the drying times.
The installation surface for the dryer
must be clean, level and firm. Do not
install the appliance on carpets!
Compensate for uneven floors with the
height-adjustable feet.
The size of the installation area
depends on the dimensions of the
dryer. Ensure that there is adequate
room for the swivel range of the door!
If installed in a garage, the dryer
must be installed on a substantial
platform at least 18 inches (46 cm)
above the floor to reduce the
likelihood of igniting flammable
vapors and be located or protected
so it cannot be damaged by a
moving vehicle
Dryer Dimensions
J
Dimension Weight
a 27,0" (68,6cm) 125Ibs
b 31,8" (81,0cm) (56,7kg)
c (min)* 36,9" (93,6cm) with
packaging
c 37,8" (95,9cm) 143Ibs
(max)* (64,8kg)
d 22,0" (59,7cm)
angle160°
e 53,9" (136,9cm)
* min=dryer feet all the way in, max=out
Useful Tools
The following tools are helpful during
installation:
1. T20 star head screwdriver
2. Philips screwdriver (#2)
3. Flat blade screwdriver
4. Open end wrench 1 in. (25mm)
5. Bubble level
1
2
4
5
Checklist for Installation
1. Unpack the dryer.
2. Remove all objects from the drum.
3. Check the dryer for visible
damage.
4. Position the dryer near the
installation location (see page 8).
5. If required, change the door hinge
to the left (see page 9).
6. If required, install the side or
bottom exhaust air outlet on the
dryer (see page 18).
7. Have the gas supply connected by
an qualified technician (see page
15).
8. Install exhaust ductwork if
necessary.
Follow the installation instructions
supplied by the appropriate
ductwork parts manufacturers (see
page 17)
Loading ...
Loading ...
Loading ...