Loading ...
Loading ...
Loading ...
7
ovente.com
USING your HAND MIXER
1
1
2
3
4
5
1
2
3
4
5
6
7
BEFORE INITIAL USE
Wash the beaters and storage case in warm, soapy water.
Rinse, and let them dry.
WARNING: Do not immerse the hand mixer's body in water
or other liquids. You can wipe it with a soft, damp cloth.
ATTACHING THE BEATERS
Make sure the hand mixer is turned off and not connected to
the wall outlet.
Locate the two half-circles near the end of each beater.
Locate the breaks in the slots of the motor housing.
Insert the beaters into the slots such that the half-circles go
into the breaks.
Push down until the beaters click into place.
MIXING
Plug the power cord into a standard 120V AC electrical outlet.
Place the beaters into the ingredients to be mixed.
Slide the speed switch to the desired setting. The speed ranges
from “1” (lowest) to “5” (highest).
CAUTION: To prevent the mixer from overheating, do not operate
it for more than five minutes at a time. Allow mixer to cool down
after every four or five minutes of operation.
NOTE: For best results, begin with the lowest speed setting (“1”)
and increase to a higher speed as necessary.
When adding ingredients, turn the mixer off and allow the motor
to stop. Lift the beaters out of the mixture and rest it on its heel.
Add ingredients and place the beaters back into the mixture
before continuing.
When mixing is complete, turn the mixer off. Make sure that the
motor has stopped before lifting the beaters out of the mixture.
Unplug the power cord from the electrical outlet.
Loading ...
Loading ...
Loading ...