Loading ...
Loading ...
Loading ...
39
Pull the recoil start
6.
Open choke
After the engine has started, push the choke left to the OPEN
position as the engine warms up.
7.
Turn breaker ON/ Connect
The breaker is located on the right side of the front power
panel. Flip the breaker up to allow the power to ow to the
receptacles. Connect your devices to the receptacles on the
front panel. Start with the largest loads rst.
8.
Close choke
The choke lever is located above the air lter to the left
of the recoil start. Slide the lever to the right to cut the air
supply and allow more gas into the engine to start.
5.
The recoil start is located on the left side panel next to the air
lter. Pull the recoil handle slowly until resistance is felt, then
quickly pull the recoil handle until fully extended.
CAUTION: Release the recoil handle only after
the cord has retracted. Releasing the recoil
handle while extended may cause harm to
yourself or your
equipment.
Loading ...
Loading ...
Loading ...