Loading ...
Loading ...
Loading ...
5
Select models include USB or SERIAL
communication ports and tel/DSL/Ethernet
surge protection jacks (not compatible
with PoE applications). These connections
are optional, as the UPS will work properly
without these connections.
Optional Installation
Basic Operation
UPS ON/OFF
• Plug the UPS into a live, grounded outlet.
The PROTECTED LED will illuminate, the battery charger will engage as necessary and the
SURGE ONLY / outlets will begin passing power.
• Plug equipment into the UPS: You will overload the UPS if the total volt-amp (VA) ratings
for all the equipment connected to the BATTERY BACKUP / outlets exceed the UPS
output capacity. To find your equipment’s VA ratings, look on their nameplates. If the
equipment is listed in amps (A), multiply the number of amps by 120 to determine VA. For
example: 1A × 120 = 120VA.
• Turn the UPS on: Press and hold the power button next to the PROTECTED LED. The UPS
alarm will beep once briefly. The BATTERY BACKUP / outlets will begin passing AC line
power. The UPS will automatically recharge internal batteries as needed. Once turned on,
your UPS is ready to protect connected equipment from blackouts, brownouts, overvoltages
and transient surges.
• Turn the UPS off: Press and hold the power button next to the PROTECTED LED.
18-11-058-933864.indb 5 11/20/2018 8:28:42 AM
Loading ...
Loading ...
Loading ...