Loading ...
Loading ...
Loading ...
INSTALLATION - 5991477A185/D
e
edge of the hob before assembly.
Semi-flush mounting (mm)
Mounting
Over built-in oven unit
The clearance between the hob and the kitchen
units or other built-in appliances must be enough
to ensure sufficient ventilation and air discharge.
If installed above an oven, a space must be left
between the bottom of the hob and the top of
the appliance installed below.
On an empty kitchen
If there are other pieces of furniture under the
hob, a double-layer wooden base must be
installed at least 20 mm from the bottom of the
hob to avoid any accidental contact. It must
only be possible to remove the double-layer
base using suitable equipment.
Fastening to the built-in cabinet
To ensure the hob is fixed and centred as
accurately as possible, the clips provided must
be positioned as described below:
Do not use silicone to secure the hob.
This would make it impossible to remove
the hob without damaging it.
X Y F G H K
Mod.
A 65
cm
555 -
560
482 -
486
69 85 35 93
Mod.
B 75
cm
719 -
724
482 -
486
69 53 35 66
Mod.
C 90
cm
844 -
848
482 -
486
70 112 35 75
1 Gas connection
2 Electrical connection
1 Opens on bottom
2 Opens on bottom and back
1 Opens on bottom
2 Opens on back
A min. 20 mm - max. 50 mm
B max. 50 mm
C max. 50 mm
Failure to install the double-layer
wooden base exposes the user to
possible accidental contact with sharp
or hot parts.
Loading ...