Hoshizaki KMD860MAJ Instruction Manual

Loading ...

I. Startup

WARNING

All parts are factory-adjusted. Improper adjustments may adversely affect safety,

performance, component life, and warranty coverage.

NOTICE

• If the appliance is turned off, wait for at least 3 minutes before restarting the

appliance to prevent damage to the compressor.

• To prevent damage to the water pump seal, do not leave the control switch in the

"WASH" position for extended periods when the water tank is empty.

• At startup, conrm that all internal and external connections are free of leaks.

Additional Notice for Remote Models

• The appliance must have power for a minimum of 4hours prior to startup to

prevent compressor damage.

1) Open the water supply line shut-off valve(s).

2) Remove the front panel.

3) Move the control switch on the control box to the "ICE" position.

4) Replace the front panel in its correct position.

5) Turn on the power supply, and allow the appliance to operate for a total of 10 minutes.

6) Turn off the power supply, then remove the front panel.

7) Remove the insulation panel, then remove

splash guard, cube guide B, and cube

guide A. Next, remove the overow cap,

overow pipe, water shield, and drain plug.

See Fig. 15.

8) After the water tank has drained, replace

all parts removed in step 7 in their correct

positions. Be careful not to cross thread the

drain plug or overow pipe.

9) Clean the dispenser unit/ice storage

bin liner using a neutral cleaner. Rinse

thoroughly after cleaning.

10) Replace the front panel in its correct

position.

11) Turn on the power supply to start the automatic icemaking process.

12) During the rst 5 minutes of the freeze cycle, conrm bin control operation by pressing

and holding the bin control's actuator paddle until the appliance shuts down. The

appliance should shut down in approximately 15 seconds.

13) On water-cooled models, conrm proper condenser drain outlet/return outlet

temperature as outlined in "II.F.2. Water-Cooled Condenser."

Overow Pipe

Cube Guide A

Overow Cap

Water

Shield

Drain

Plug

Cube Guide B

Fig. 15

Splash Guard

Loading ...

Hoshizaki KMD860MAJ KMD-860MAJ 31" Modular Crescent Cuber

Instruction Manual - Page 27