Loading ...
Loading ...
Loading ...
8 Press down slightly and close the lever to lock the Edge device into the mount.
9 Connect the power pod cable to the compatible power cable on your eBike (Required Cables, page45).
Required Cables
In order to complete the installation, you must purchase one of these compatible cables:
• Bosch
®
power mount accessory cable
• Shimano
®
power mount accessory cable
NOTE: Garmin recommends having a bike technician trim the compatible Shimano cable to the correct
length.
Wire Color Wire Function
Red Power
Yellow Power
Blue Ground
Black Ground
• USB-A power mount accessory cable
NOTE: If you have trouble installing and wiring the mount, Garmin recommends visiting a bike service store for
assistance.
Edge Power Mount Status LED
LEDActivity Status
Solid green The power mount is connected to power, but it is not connected to an Edge device.
Flashing green The power mount is connected to the Edge device and is charging.
Flashing red
An error occurred. Unplug the power mount, and remove the Edge device. Plug the power
mount in again, and install the Edge device. If the red flashing continues, contact Product
Support.
Device Information 45
Loading ...
Loading ...
Loading ...