Loading ...
Loading ...
Loading ...
49-1000105 Rev. 48
Not all features are on all models.
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Large Bins
The larger refrigerator door bins and freezer tilt-out door
bins are adjustable.
To remove: Lift the front of the bin straight up, then lift
up and out.
To replace or relocate: Engage the back side of the bin
in the molded supports of the door. Then push down on
the front of the bin. Bin will lock in place.
Small Bins
To remove: Lift the front of the bin straight up then out.
To replace: Position the bin above the rectangular
molded supports on the door. Then slide the bin down
onto the support to lock it in place.
The snugger helps prevent tipping, spilling or sliding of
small items stored on the door shelf. Place a finger on
either side of the snugger near the rear and move it back
and forth to fit your needs.
NOTE: Be careful when placing items in the top bin. Make
sure that items do not block or fall into the ice chute.
Shelves and Bins
Refrigerator bin
Freezer tilt-out bin
Snugger
Freezer bin
Ice Chute
Edge-to-Edge Shelf
To remove: With door opened at an angle greater than
90°, slide the shelf out until it reaches the stop tab. Press
down on the tab and slide the shelf out until it reaches
the shelf’s back trim. While keeping the left side of the
shelf in contact with the cabinet, pull the shelf down and
forward toward the left to remove.
To replace or relocate: With door opened at an angle
greater than 90°, align the shelf’s back trim against the
VKHOIVXSSRUW.HHSLQJWKHOHIWVLGHDJDLQVWWKHFDELQHW
slowly lift and gently push the shelf back into place.
Reposition the shelf past the stop tabs. Make sure you
push the shelves all the way back in before you close
the door.
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you to reach items
stored behind others. The special edges are designed
to help prevent spills from
dripping to lower shelves.
To remove: Slide the shelf
out until it reaches the stop,
then press down on the tab
and slide the shelf straight
out.
To replace or relocate: Line the shelf up with the supports
and slide it into place. The shelf can be repositioned when
the door is at 90° or more. To
reposition the shelf, slide the
shelf past the stops and angle
downward. Slide shelf down
to the desired position, line up
with the supports and slide into
place.
Make sure you push the shelves all the way back in before
you close the door.
Press tab and pull shelf
forward to remove
USING THE REFRIGERATOR: Shelves and Bins
Press tab and pull shelf
forward
With left side stays against
the cabinet as you pull down
and to the left to remove
Loading ...
Loading ...
Loading ...