Loading ...
Loading ...
Loading ...
2. Open magazine fully and turn tool sideways with discharge
area pointed away from yourself and others. Load fastenerss in
channel.
3. Push magazine closed until it locks in place.
FIG. 4
Depth Setting (Fig. 1)
WARNING: Disconnect air line from tool and remove fasteners
from magazine before making adjustments or personal injury may
result.
The fastener depth control adjustment feature provides close
control of the fastener drive depth from flush with or just above the
work surface to shallow or deep countersink.
Rotate depth control adjustment wheel (K) to give the desired depth
of drive.
Belt Hook (Fig. 1, 5)
The belt hook (J) can be changed to either side of the tool to
accommodate left- or right-handed users.
INSTALLING THE BELT HOOK
WARNING: Disconnect air line from tool and remove fasteners
from magazine before making adjustments or before attempting any
assembly or disassembly.
WARNING: Always remove the belt hook from the tool when
selecting Contact Trip Mode.
1. Assure that the sequential trip mode is selected.
2. Squeeze the sides of the belt hook body.
FIG. 5
J
3. Align the post on the belt hook body with the alignment hole and
push into position.
4. Release the sides of the belt hook body and check to ensure that
the belt hook is locked in position.
Using The Integrated Pencil Sharpener
(Fig. 6)
A standard pencil sharpener (L) is integrated into the belt hook for
the operator’s convenience. To sharpen a pencil, insert any standard
pencil into the hole and rotate the pencil to the right (clockwise)to
sharpen.
English
9
Loading ...
Loading ...
Loading ...