Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/62692038-t654n/bg76.png)
Menu item Description
PS SmartSwitch
On
O
Sets the printer to automatically switch to PS emulation when a print job
received through a parallel port requires it, regardless of the default printer
language
Notes:
• On is the factory default setting.
• When the O setting is used, the printer does not examine incoming
data.
• When the O setting is used, the printer uses PCL emulation if PCL
SmartSwitch is set to On. It uses the default printer language specified in
the Setup menu if PCL SmartSwitch is set to O.
NPA Mode
On
O
Auto
Sets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
• Auto is the factory default setting.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Parallel Buer
Disabled
Auto
3K to <max size allowed>
Sets the size of the parallel input buer
Notes:
• Auto is the factory default setting.
• The Disabled setting turns
o
job
buering.
Any jobs already
buered
on
the disk are printed before normal processing is resumed.
• The parallel buer size setting can be changed in 1K increments.
• The maximum size allowed depends on the amount of memory in the
printer, the size of the other link buers, and whether Resource Save is
set to On or
O.
• To increase the maximum size range for the Parallel Buer, disable or
reduce the size of the USB, serial, and network buers.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Job Buering
O
On
Auto
Temporarily stores jobs on the printer hard disk before printing
Notes:
• O is the factory default setting.
• The
O
setting does not
buer
print jobs to the printer hard disk.
• The On setting buers jobs on the printer hard disk.
• The Auto setting buers print jobs only if the printer is busy processing
data from another input port.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Understanding printer menus 118
Loading ...
Loading ...
Loading ...