Loading ...
Loading ...
Loading ...
En-6
OPERATING MANUAL
(continued)
Timer Operation
Note for timer settings:
Any interruption of the power supply, such as a blackout or cutting off of a circuit breaker, makes the set internal clock go wrong.
In such a case, the TIMER indicator on the indoor unit blinks, and you need to readjust the setting.
ON timer or OFF timer
You can set the ON timer or OFF timer with the following steps.
1.
Press the TIMER SETTING button to start the setting.
The WEEKLY indicator will be fl ashing on the remote controller.
2.
Press the SELECT button to choose the desired mode. The mode
will change as follows:
WEEKLY
ON/OFF
(ON)
ON/OFF
(OFF)
ON/OFF
(ON
OFF)
SLEEP
(OFF)
3.
Press the NEXT button. Continue to setting for each mode.
* To cancel timer setting during the setting process, press the
TIMER SETTING button again.
4.
Adjust the time by pressing the SELECT button while the clock
indicator is blinking. Each time you press the button, the time will
change by +5/-5 minutes. Pressing down will change the time by
+10/-10 minutes.
5.
Press the SEND button.
To redo the timer setting, perform step 1 to 5 again.
To cancel the ON/OFF timer, press the ON/OFF button while the ON/
OFF indicator is on. (Erases the indicator)
Program timer (combined use of the ON timer and the OFF timer)
You can set an integrated ON–OFF or OFF–ON timer.
Either of the timer whose confi gured starting time is closer to the
current time works fi rst, and the order of timer operation is displayed
as follows:
Timer Indicator on remote controller display
ON–OFF timer
OFF–ON timer
To set the program timer, conduct the same steps 1~5 for the ON/
OFF timer. (Select ON
OFF in Step 2)
Notes:
• If you change the setting value for the timer after the program timer
is set, the counting down of the timer will be reset at that moment.
• Time setting for each combination should be within a span of 24
hours.
SLEEP timer
To set the SLEEP timer, fi rst follow steps 1~3 for the ON/OFF timer.
4.
Adjust the time by pressing the SELECT button while the clock
indicator is blinking.
Each time you press the button, the time changes as follows:
9H
00M
7H
00M
5H
00M
3H
00M
2H
00M
1H
00M
0H
30M
hours
(30 min.)
5.
Press the SEND button.
To cancel the SLEEP timer, press the SLEEP button while the SLEEP
indicator is on. (Erases the indicator)
To help you to fall asleep comfortably and prevent excessive warming
or cooling in sleep, the SLEEP timer controls the temperature setting
automatically in accordance with the set time shown as follows. The
air conditioner completely turns off after the set time has elapsed.
In HEAT mode
Set
temperature
Set time
1 hour
Set time
1 hour
1.5 hour
30 min.
2 °F (1 °C)
4°F (2 °C) 6°F (3 °C)
8°F (4 °C)
4°F (2 °C)
2 °F (1 °C)
In COOL or DRY mode
9387081046_OM.indb 69387081046_OM.indb 63/4/2016 10:53:31 AM3/4/2016 10:53:31 AM
Loading ...
Loading ...
Loading ...