Loading ...
Loading ...
Loading ...
Before using for the first time en
15
KBefore using for the first
time
Be f o r e usi ng for the fi rst ti me
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
Heating up the oven
To remove the new cooker smell, heat up the oven
when it is empty and closed. Ensure that no packaging
material has been left in the cooking compartment.
Keep the kitchen ventilated the whole time the oven is
on.
Setting the oven's lower gas burner
Example in diagram: Heat at 270 °C.
1. Open the top cover. The top cover must remain
open for as long as the cooker is in operation.
2. Turn on the main gas supply to the appliance. Insert
the plug into the socket. Open the oven door.
3. Push in the function selector for the lower gas burner
and turn it anti-clockwise to 270 °C.
4. Keep the function selector for the lower gas burner
pressed in and press the ignition button 8 at the
same time.
5. The gas that escapes from the lower gas burner is
ignited using the ignition button. Keep the function
selector for the lower gas burner pushed in for 10
seconds so that the safety pilot starts up.
6. Check through the hole in the oven's bottom panel
that the flame is burning. If the flame is not burning,
repeat the process from step 3.
7. Close the oven door carefully.
8. Switch off the function selector for the lower gas
burner after 30 minutes.
Setting the gas grill
1. Open the top cover. The top cover must remain
open for as long as the cooker is in operation.
2. Turn on the main gas supply to the appliance. Insert
the plug into the socket.
3. Insert the protecting plate into the groove below the
control panel.
Insert the protecting plate with the longer edge at the
front and the curvature at the bottom.
Secure the protecting plate in the groove below the
control panel using the retainers.
Ensure that the protecting plate is engaged in the
retainers. If the protecting plate cannot be removed,
it is properly engaged. You can now safely use the
protecting plate. If it can be removed, insert it into
the groove at a slightly higher angle and make sure
that it engages in the retainers.
4. Close the oven door so that it is as close as possible
to the protecting place.
5. Push in the function selector and turn it clockwise to
the grill setting ( .
6. Keep the function selector pressed in and press the
ignition button 8 at the same time.
7. The gas coming from the gas grill is ignited using
the ignition button. Keep the function selector
pushed in for 10 seconds so that the safety pilot
starts up.
8. Check whether the flame continues to light up. If the
flame goes out, repeat the process from step 5.
9. Switch off the function selector after 30 minutes.
Once the oven has cooled down, remove the
protecting plate.
&
Loading ...
Loading ...
Loading ...