Loading ...
www.PyleUSA.com
2
DESCRIPTION
1 - Viewing Window
2 - Front Cover
3 - LCD Display
4 - Control Panel
5 - Ice Cube Dispenser Shoot
6 - Ice Cube Dispenser Puncher
7 - Water Drip Tray
8 - Water Outlet
9 - Fan Cover
10 - Water Reservoir Access Door
11 - Side Shell
12 - Top Cover
13 - Back Cover
14 - Water Inlet Hole
15 - Power Cord
16 - Drain Pipe
Before/First Use of Your Ice Maker
1. During transportation, the incline angle of the cabinet should not be over 45°. Do not turn the Ice Maker
upside down, this may damage the compressor and sealed system.
2. Remove all packing material and carefully check your ice maker to ensure it is in good condition and that
there is no damage to the ice maker or power cord and plug.
3. The Ice maker should be placed horizontally on a level surface. To ensure proper ventilation for your Ice
maker allow 150mm of space at the top, the back and on each side. Do not install the Ice maker near an
oven, radiator, or any other heat source.
4. Before using the Ice maker for the rst time, please wait 2 hours after positioning it, and keep the front lid
open for at least 2hours.
5. Ensure that the voltage indicated on the ice maker corresponds with the voltage in your home.
6. Pure water is not allowed to be used on this unit, spring water is recommended.
7. Always keep the viewing window close during ice making.
1
2
3
4
5
6
7
12
11
10
9
8
13
14
15
16
Loading ...
Loading ...
Loading ...