Fellowes 5000101 Flex Product Manual

Loading ...

CARE AND MAINTENANCE

CLEANING:

 • Cleanexternalhousingasnecessarybywipingwithadry,softcloth;forstains,useawarm,dampcloth.

 • Donotusevolatilefluidssuchasbenzene,paintthinner,scouringpowderorothercleanersthatmaydamagetheunitsurface.

 • Cleanintakeandexhaustventsbywipingwithadry,softcloth.

Unlock access panel: to unlock, insert the

keyprovidedandrotatecounter-clockwise

¼ turn.

Open front access panel by pressing latches

on both sides of unit. Allow panel to open

fully. Remove filter(s) to be replaced.

Remove any packaging wrap from the

newfilters(s)andre-installthefilters.

Repeat this process on both sides.

FILTER REPLACEMENT INDICATORS:

ThereplacementfilterindicatorswillsignalwhentoreplacetheHEPAFilterand/orCarbonwithPre-Filter.Thereplacementperiodwillvarydependingonthehoursofuse,air

quality,andrateofairflow.However,undernormalusage,mostHEPAFiltersneedtobereplacedeveryyear,andCarbonwithPre-Filterevery6months.Whenafilterneedstobe

replacedthefollowingcolorwillbeshownonanyoneoftheHEPA,CARBON,orACCESSORYfilterreplacementindicators:

 RedFlashing=RIGHTfilter90%full

 AmberFlashing=LEFTfilter90%full

 RedFlash,Pause,AmberFlash,Pause=Right&LEFTfilters90%full

 Red=ReplaceRIGHTfilter

 Amber=ReplaceLEFTfilter

Red & Amber Alternating = Replace Right & Left filters

Donotwashandreuseanyofthefilters–theywillnotworkeffectively.OnlyuseAeraMax

PRO brand replacement filters as units will not function using any other replacements.

FILTER REPLACEMENT PROCEDURE:

FILTER REPLACEMENT:

When installing a new filter the unit will automatically detect the filter type but the user will have to manually reset the filter replacement indicators. To reset the flashing filter

replacement indicator use the following procedure:

TROUBLESHOOTING

PROBLEM: POSSIBLE SOLUTION:

The air quality control system fails to start.

• Checktoassureunitisconnectedtopowersupply.

• MakesurefiltersaregenuineAeraMax

Pro filters, as unit will not function with other

 brands.IMPORTANT:MakesurefilterdetectionareaongenuineAeraMax

Pro

replacement filter aligns with window in filter frame.

• Review“Re-InstallingFilters”sectionforfurtherdetail.

• Makesurefrontaccesspanelisclosedcompletely.

• Makesurepowerswitchison.

The unit makes a faint ticking sound. • Thisindicatesthatthe“PlasmaTRUE™”bipolarionizerisworking.

TheHEPAand/orCarbonFilterreplacementindicatorlight

remain lit after replacing the filter(s).

• Repeat filter light reset instruction.

Note: If you do not complete step three within 10 seconds of completing step 1 then the indicator light will not be reset.

3 4

Touch and hold the illuminated

indicator for three seconds until

a beep is heard and the indicator

is flashing green.

Release finger from indicator.

Repeat this process on both sides.

Touch and hold the indicator for three

seconds until a beep is heard and the

indicator light turns off.

AM-PRO UI & INDICATOR LAYOUT

PROJECT:

DATE:

REV:

AUTHOR:

COPERFIELD

03-AUG-16

M. GARTZ

OPERATION

Theairpurifiercontinuouslyworksinautomaticmode;theusercanselectwhichpreferencetheywouldlikethepurifiertousebasedonthelocationordesired

operation of the air purifier. The purifier will operate through a minimized range of speeds, not exceeding the maximum level selected, in order to run quietly while

cleaning the room of contaminants. Once air is cleaned, and no sensors are activated, the unit lowers to energy saving mode to reduce energy consumption and

extend the life of the filters.

WhenAutoModeisselected,theAutomodeindicatorwillbeblue.ThismodeusestheEnviroSmart™technologytomonitortheairquality,motionandnoiselevel

to adjust the fan speed in order purify your air as quickly as possible. Once air is cleaned, and no sensors are activated, the unit lowers to energy saving mode to

reduce energy consumption and extend the life of the filters.

WhenQuietModeisselected,theAutoModeindicatorwillbegreen.ThemachinewillcontinuetouseEnviroSmart™butonlyutilizesthe3lowest,mostquietof

the 5 fan speeds.

When Manual Mode is selected, the Manual mode indicator will be blue. This mode allows you to choose one of the 5 fan speeds and keep unit at this speed until

AutoModeischosen/selected.EnviroSmart™sensorswillNOTadjustthefanspeedinthismode.

DISPLAY PANEL

HEPA FILTER REPLACEMENT INDICATOR–This indicator will show

its status when the access panel is open or closed. If the light is red this indicates

the filter needs replacing. The replacement period will vary depending on the

filters used, hours of use, air quality, and rate of air flow. For filter replacement

indicator descriptions see FILTER REPLACEMENT INDICATORS section.

CARBON FILTER REPLACEMENT INDICATOR–This indicator will

show its status when the access panel is open or closed. If the light is red this

indicates the filter needs replacing. The replacement period will vary depending

on the filters used, hours of use, air quality, and rate of air flow. For filter

replacement indicator descriptions see FILTER REPLACEMENT INDICATORS section.

ACCESSORY INDICATOR– This indicator will show its status when the

access panel is open or closed. This indicator will only be used if an accessory filter

is installed in the unit. If the light is red this indicates the filter needs replacing.

The replacement period will vary depending on the filters used, hours of use, air

quality, and rate of air flow. For filter replacement indicator descriptions see FILTER

REPLACEMENT INDICATORS section.

AIR QUALITY SENSOR–This indicator will show its status when the

access panel is open or closed. This indicator monitors the air quality and adjusts

thefanspeedtokeepyourairpurified.Blue,amber,andredlightsindicatethe

purity of your air.

PlasmaTRUE™ TECHNOLOGY– This indicator will show its status when

theaccesspanelisopenorclosed.Createsanionizedfieldtohelpsafelyremove

airborne pollutants. To turn on and off the PlasmaTRUE™ TECHNOLOGY, touch

andholdthePLASMAindicator. A blue light illuminates when the PlasmaTRUE™

TECHNOLOGYisenabled.TodisablethePlasmaTRUE™TECHNOLOGY,pressandhold

“Plasma” indicator until light is off.

AUTO MODE–To select, press and hold the button until the icon illuminates. This

modeusestheEnviroSmart™technologytomonitortheairquality,motionandnoiselevel

to adjust the fan speed in order to purify your air as quickly as possible. This button also

includesQUIETMODE.Toselect,pressandholduntilthebuttonturnspurple.Themachine

willcontinuetouseEnviroSmart™butonlyutilizesthe3lowest,mostquietofthe5fan

speeds.

MANUAL MODE–To select, press the button until the icon illuminates. This

mode allows you to choose one of the 5 fan speeds and keep the unit at this speed

untilAUTOMODEischosenagain.Theinternalsensorswillnotadjustthefanspeed

in this mode.

FAN SPEED INDICATORS – The fan has 5 speeds and can reach turbo

speed to clean the room in case of high levels of contaminants. The number of bars

illuminated indicates fan speed.

1 2 3 4 5 6 7 8

NOTE:aftertheunitisturnedonthe“AQ”lightwillflashforafewminuteswhilethesystemself-calibrates.

1–whisper

2–low

3–medium

4–high

5–turbo

AeraMaxPro_AM4_Flex_412643_REVC_3L_082222.indd 4-5 8/22/22 10:24 AM

Loading ...

Fellowes 5000101 AeraMax Pro AM4 FLEX Air Purifier

Flex Product Manual - Page 3