Loading ...
Loading ...
Loading ...
34
Smart ECO Saving
The Smart ECO Saving function reduces power consumption by controlling the electric current used by
the product panel.
―
This option is not available when
SAMSUNG
MAGIC
Bright is in Dynamic Contrast mode.
―
This menu is not available when Eye Saver Mode is enabled.
―
Game Mode wil automatically turn off when Smart ECO Saving is enabled.
• Off: Deactivate the Smart ECO Saving function.
• On: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
Off Timer Plus
Configuring Off Timer
Off Timer: Turn on Off Timer mode.
Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
―
This option is only available when Off Timer is set to On.
―
For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer to
activate, go to →System→Off Timer Plus and set Off Timer to Off.
Configuring Eco Timer
Eco Timer: Turn on Eco Timer mode.
Eco Off After: The Eco Timer can be set between 10 and 180 minutes. The product will automatically
power off after the specified time has elapsed
―
This option is only available when Eco Timer is set to On.
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged.
This option is useful when you view a movie.
• Set to PC when connected to a PC.
• Set to AV when connected to an AV device.
―
Products with a display area of 16:9 or 16:10 are only supported.
―
If the product (when set to HDMI/DisplayPort) is in power saving mode or is displaying the message Check
Signal Cable, press the JOG button to display the function-button screen and then select →System→
PC/AV Mode→HDMI→PC or AV.
Source Detection
Select either Auto or Manual as the method to recognize input signal.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once
when a button is pressed.
Loading ...
Loading ...
Loading ...