Home
Bookmarks
Home
Bosch
Bosch WAN20050IL/24 User Manual
Bosch WAN20050IL/24 Serie 4 Washing machine
User Manual
For WAN20050IL/24.
PDF File Manual
,
40 pages
,
Read Online
|
Download pdf file
Your new washing machine
Display rules
: Warning!
Caution!
Note/tip
1. 2. 3. / a) b) c)
■ / -
Contentsen Instruction Manual and Installation Instructions
8 Intended use 4
( Safety instructions 5
7 Environmental protection 11
5 Positioning and connecting 11
* Getting to know the appliance 19
Z Laundry 22
C Detergent 23
0 Programme default settings 24
\ Additional programme settings 25
1 Operating the appliance 26
H Sensors 30
Q Appliance settings 31
2 Cleaning and maintenance 31
3 Faults and what to do about them 34
4 After-sales service 39
J Technical data 39
r Aqua-Stop warranty 39
8 Intended use
Intended use
■ This appliance is intended for private domestic use only.
■ Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoor conditions. There is a risk that the appliance will be damaged if residual water in it freezes. If hoses freeze up, they may crack/burst.
■ This appliance must only be used for washing domestic laundry, consisting of machine-washable items and hand-washable woollens (see label on item). Using the appliance for any other purpose is outside of the scope of its intended application and ...
■ This appliance is suitable for operation with mains water and commercially available detergents and care products (must be suitable for use in washing machines).
■ This appliance is intended for use up to a maximum height of 4000 metres above sea level.
( Safety instructions
Safety instructions
Children/people/pets
: Warning
Risk of death!
■ The appliance may be used by children over the age of 8 years and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge as long as they are supervised or have received instruction on how...
■ Children must not play with this appliance.
■ Do not allow children to clean or maintain this appliance unsupervised.
■ Keep children under 3 years and pets away from this appliance.
■ Do not leave the appliance unattended when children or other people who are unable to assess the risks are in the vicinity.
: Warning
Risk of death!
■ Do not position the appliance behind a door, as this may obstruct the appliance door or prevent it from opening completely.
■ Once an appliance has reached the end of its life, pull the mains plug from the socket before severing the mains cable, and then destroy the lock on the appliance door.
: Warning
Risk of suffocation!
: Warning
Risk of poisoning!
: Warning
Risk of burns!
: Warning
Eye/skin irritation!
Installation
: Warning
Risk of electric shock/fire/ material damage/damage to the appliance!
■ The mains voltage on your power socket matches the rated voltage specified on the appliance (identification plate). The connected loads and the required fuse protection are specified on the identification plate.
■ The appliance is only connected to a source of alternating current via a nationally recognized and grounded outlet that has been correctly installed.
■ The mains plug and the grounded socket match and the earthing system has been correctly installed.
■ The cross section of the cable is sufficiently large enough.
■ The mains plug is accessible at all times.
■ If using a residual current circuit breaker, only use one that bears the following mark: z. The presence of this mark is the only way to be sure that it fulfils all the applicable regulations.
: Warning
Risk of electric shock/fire/ material damage/damage to the appliance!
: Warning
Risk of fire/material damage/ damage to the appliance!
: Warning
Risk of injury/material damage/damage to the appliance!
: Warning
Risk of injury!
Caution!
Material damage/damage to the appliance
Operation
: Warning
Risk of explosions/fire!
: Warning
Risk of poisoning!
: Warning
Risk of injury!
: Warning
Risk of scalding!
: Warning
Eye/skin irritation!
Caution!
Material damage/damage to the appliance
Cleaning/Maintenance
: Warning
Risk of death!
■ Switch off the appliance. Disconnect the appliance from the power supply (pull out the plug).
■ Never take hold of the mains plug with wet hands.
■ When removing the mains plug from the socket, always take hold of the plug itself and never the mains cable, otherwise this may damage the mains cable.
■ Do not make any technical modifications to the appliance or its features.
■ Repairs and any other work on the appliance must only be conducted by our customer service or by an electrician. The same applies for replacing the mains cable (when necessary).
■ Spare mains cables can be ordered from our customer service.
: Warning
Risk of poisoning!
: Warning
Risk of electric shock/material damage/damage to the appliance!
: Warning
Risk of injury/material damage/damage to the appliance!
Caution!
Material damage/damage to the appliance
■ Do not allow these agents to come into contact with the surfaces of the appliance.
■ Clean the appliance with nothing but water and a soft, damp cloth.
■ Remove any detergent, spray or other residues immediately.
7 Environmental protection
Environmental protection
Packaging/used appliance
Tips on economical use
■ For optimum energy and water savings, fill the appliance with the maximum amount of laundry for each programme.
■ Wash normally soiled laundry without a prewash.
■ Save energy and detergent when washing lightly and normally soiled laundry. ~ "Detergent" on page 23
■ The temperatures which can be selected refer to the care labels on the textiles. The temperatures used in the machine may deviate from this to ensure you get the optimum combination of energy-saving and washing results.
■ In order to save energy, the appliance switches to energy saving mode. The display panel lighting goes out after a few minutes and the Start Reload A button flashes. ~ "Display panel" on page 20
■ If the laundry is subsequently dried in a tumble dryer, select the spin speed according to the tumble dryer manufacturer's instructions.
5 Positioning and connecting
Positioning and connecting
Included with the appliance
Notes
■ Check the machine for transport damage. Never use a damaged machine. If you have any complaints, contact the dealer from whom you purchased the appliance or our after-sales service.
■ Moisture inside the drum is due to final testing.
■ Standard
■ Aqua-Secure
■ Aqua-Stop
■ Operating and installation instructions + supplementary sheet for the operating and installation instructions
■ After-sales service location directory*
■ Warranty*
■ Cover caps for openings after the transport locks have been removed
■ Measuring aid* for liquid detergent
■ Adapter with sealing washer from 21 mm = ½" to 26.4 mm = ¾" *
Useful tools
■ Spirit level for aligning
■ Spanner with:
Safety instructions
: Warning
Risk of injury!
Caution!
Damage to the appliance
Caution!
Water damage
Notes
■ In addition to the safety information listed here, the local water and electricity supplier may have special requirements.
■ If in doubt, have the appliance connected by a specialist.
Installation surface
Note:
■ The installation surface must be firm and level.
■ Soft floors/floor coverings are not suitable.
Installation on a base or a wooden joist floor
Caution!
Damage to the appliance
Note:
■ In a corner, if possible,
■ On a water-resistant wooden board (min. 30 mm thick) which is screwed tightly to the floor.
Installation on a platform with drawer
Installing the appliance in a kitchenette
: Warning
Risk of death!
Notes
■ Recess width of 60 cm required.
■ Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets.
Removing the transport locks
Caution!
Damage to the appliance
Note:
1. Take the hoses out of the holders.
2. Remove the mains cable from the holders. Unscrew and remove all four transport lock screws.
3. Fit the covers. Lock the covers firmly in place by applying pressure to the snap-in hooks.
Hose and cable lengths
■ Left-hand connection
■ Right-hand connection
Tip:
Water inlet
: Warning
Risk of electric shock!
Notes
■ Only operate the washing machine using cold mains water.
■ Do not connect the machine to the mixer tap of an unpressurised hot- water boiler.
■ Do not use a used supply hose. Only use the supply hose supplied or one that was purchased from an authorised specialist retailer.
■ Do not kink or squash the water supply hose.
■ Do not alter (shorten, cut through) the water supply hose (otherwise, its strength is no longer guaranteed).
■ Only tighten the screw connections by hand. If the screw connections are tightened too much with a tool (pliers), the thread may become damaged.
■ When connecting to a 21 mm = ½" tap, first fit an adapter with a sealing washer from 21 mm = ½" to 26.4 mm = ¾".
■ Model: Standard
■ Model: AquaSecure
■ Model: Aqua-Stop
Note:
Water outlet
Caution!
Water damage
Notes
■ Do not kink the water drain hose or put strain on it lengthways.
■ Height difference between the installation surface and the drain: min. 60 cm, max. 100 cm
■ Outlet in a sink
: Warning
Risk of scalding!
Caution!
Damage to the appliance/fabrics
■ Drainage into a siphon
Levelling
1. Loosen the lock nuts using a wrench, by turning it in a clockwise direction.
2. Check the alignment of the washing machine with a spirit level, and adjust it if necessary. Change the height by turning the appliance feet.
3. Tighten the lock nut against the housing.
Electrical connection
: Warning
Risk of death!
Notes
■ The mains voltage and voltage indicated on the washing machine (rating plate) are the same.
■ The washing machine is only connected to an alternating current supply via a properly installed earthed socket.
■ The mains plug fits the socket.
■ The cable cross-section is adequate.
■ The earthing system is properly installed.
■ The mains cable is only replaced by a qualified electrician (if this is necessary). Replacement mains cables are available from the after- sales service.
■ No multiple plugs/couplings or extension cables are used.
■ If an earth-leakage circuit breaker is used, only a type which displays the z symbol is used.
■ The mains plug can be accessed at all times.
■ The mains cable is not kinked, squashed, altered or cut through.
■ The mains cable does not come into contact with heat sources.
Before washing for the first time
Note:
1. Check the appliance.
Note:
2. Remove the protective foil from the worktop and the control panel.
3. Connect the mains plug.
4. Turn on the water tap.
5. Do not load any laundry. Close the door.
6. Run the Cottons 90 °C programme.
7. Open the detergent drawer.
8. Pour approximately 1 litre of water into compartment II.
9. Pour standard detergent into compartment II.
Note:
10. Close the detergent drawer.
11. Press the Start Reload A button.
12. When the programme ends, switch off the appliance.
Transportation
1. Turn off the water tap.
2. Reduce the water pressure in the supply hose.
3. Drain the remaining detergent solution.
4. Disconnect the washing machine from the mains.
5. Remove the hoses.
1. Remove the covers and keep them in a safe place.
2. Insert all four sleeves.
Notes
■ The transport locks must be removed. ~ "Removing the transport locks" on page 14
■ To prevent unused detergent from flowing straight into the drain during the next wash: Pour approx. 1 litre of water into compartment II and start the Drain/Empty programme.
* Getting to know the appliance
Getting to know the appliance
Washing machine
Control panel
Display panel
Note:
Button
Display indicator
Description
More information on the display panel
Display indicator
Description
Note:
Z Laundry
Laundry
Preparing the laundry
Caution!
Damage to the appliance/fabrics
■ Empty any pockets.
■ Check for metal items (paper clips, etc.) and remove them.
■ Wash delicates in a laundry bag (tights, underwired bras, etc.).
■ Remove curtain fittings or place curtains in a laundry bag.
■ Close any zips, button up any cover buttons.
■ Brush sand out of pockets and collars.
Sorting laundry
■ Type of fabric/fibre
■ Colour
Note:
■ Soiling Wash laundry with the same level of soiling together.
■ Symbols on the care labels
Note:
Starching
Note:
Dyeing/bleaching
Soaking
1. Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions.
2. Select the desired programme.
3. Press the Start Reload A button to start the programme.
4. After approx. ten minutes, press the Start Reload A button to pause the programme.
5. After the desired soaking time, press the Start Reload A button again to continue or change the programme.
Notes
■ Load laundry of the same colour.
■ No additional detergent is required; the soaking solution is used for washing.
C Detergent
Detergent
Correct selection of detergent
■ Standard detergent with optical brighteners
■ Detergent for colours without bleach or optical brighteners
■ Detergent for colours/delicates without optical brighteners
■ Detergent for delicates
■ Detergent for woollens
Saving energy and detergent
Saving
Soiling/note
Note:
0 Programme default settings
Programme default settings
Note:
Spin speed
Note:
Ready in
1. Select a programme.
2. Press the Ready in button repeatedly until the required number of hours is displayed.
3. Press the Start Reload A button.
Note:
1. Press the Start Reload A button.
2. Use the Ready in button to change the number of hours.
3. Press the Start Reload A button.
Note:
■ Programme settings,
■ Detergent dosage (additional rinse cycles if required due to foaming),
■ Load size/type of textiles (longer washing for higher load and for textiles which absorb more water),
■ Imbalances (e. g. due to fitted sheets) are offset with several start- ups of spin cycles,
■ Fluctuations in power supply,
■ Water pressure (infeeding speed).
\ Additional programme settings
Additional programme settings
Speed Eco
■ Speed
Note:
■ Eco
1 Operating the appliance
Operating the appliance
Preparing the washing machine
Notes
■ The washing machine must be correctly installed and connected. ~ "Positioning and connecting" on page 11
■ Before washing for the first time, run a wash cycle without laundry. ~ "Before washing for the first time" on page 17
1. Connect the mains plug.
2. Turn on the water tap.
3. Open the door.
4. Check that the drum is completely drained. Drain if necessary.
Switching on the appliance/ selecting a programme
Note:
Changing the programme default settings
Selecting additional programme settings
Placing laundry into the drum
: Warning
Risk of death!
Notes
■ Mix items of laundry of varying sizes. Laundry items of different sizes distribute themselves better during the spin cycle. Individual items of laundry may lead to imbalances.
■ Observe the specified maximum load. Overfilling has a negative impact on the washing result and promotes creasing.
1. Place presorted items of laundry unfolded in the washing drum.
2. Make sure that no items of laundry are trapped between the washing machine door and the rubber seal, and close the door.
Measuring and adding detergent and care products
Caution!
Damage to the appliance
Dosing
■ Water hardness (ask your water supply company)
■ The manufacturer's instructions on the packaging
■ The amount of laundry
■ Soiling
Filling
: Warning
Eye/skin irritation!
Note:
1. Pull out the detergent drawer as far as possible.
2. Add detergent and/or care products.
3. Close the detergent drawer.
Measuring aid for liquid detergent
1. Pull out the detergent drawer. Press down the insert and fully remove the drawer.
2. Slide the measuring aid forwards, fold it down and click it into place.
3. Reinsert the drawer.
Note:
Starting the programme
Foam detection
Note:
Childproof lock
■ E lights up: The childproof lock is active.
■ E flashes: The childproof lock is active and the programme selector has been adjusted. If you reset the programme selector to the initial programme, the symbol lights up again.
Notes
■ To avoid the programme to terminate, do not turn the programme selector beyond the off position. If the appliance is switched off while the programme is running and childproof lock is activated, the programme continues when the appliance is switc...
■ To remove the laundry at the end of the programme, deactivate the childproof lock.
■ The childproof lock remains active, even once the washing machine has been switched off.
Adding/removing laundry
■ If the è symbol disappears in the display panel, the washing machine door is unlocked. You can add or remove laundry.
Notes
■ If the è symbol lights up in the display panel, it is not possible to add or remove laundry.
Note:
Changing the programme
1. Press the Start Reload A button.
2. Select another programme.
3. Press the Start Reload A button. The new programme starts from the beginning.
Cancelling the programme
1. Press the Start Reload A button.
2. To cool down laundry: Select Rinse.
3. Press the Start Reload A button.
1. Press the Start Reload A button.
2. Select Drain/Empty.
3. Press the Start Reload A button.
Programme end during Rinse Stop
■ Pressing the Start Reload A button (the laundry will be spun with the default spin speed setting) or
■ Selecting a spin speed or setting the programme selector to Drain/Empty and then pressing the Start Reload A button.
Programme end
Removing laundry/switching off the appliance
1. Turn the programme selector to the off position. The appliance is switched off.
2. Open the door and remove the laundry.
3. Turn off the tap.
Note:
Notes
■ Always wait until the programme ends, as the appliance could still be locked.
■ At the end of the programme, the appliance switches to energy saving mode. The lighting goes out and the Start Reload A button flashes. Press any button to activate the panel.
■ Do not leave any items of laundry in the drum. They may shrink in the next wash or discolour another item.
■ Remove any foreign objects from the drum and the rubber seal – risk of rusting.
■ Wipe the rubber seal and the washing machine door dry.
■ Leave the door and detergent drawer open so that any residual water can evaporate.
H Sensors
Sensors
Automatic load sensing
Unbalanced load detection system
Note:
Q Appliance settings
Appliance settings
■ The volume of the information signals (e.g. at the end of the programme) and/or
■ The volume of the button signals.
Activating the setting mode
1. Turn the programme selector to position 1. The washing machine is switched on.
2. Press the Start Reload A button and, at the same time, turn the programme selector clockwise to position 2. Release the button.
Changing the volume
■ To change the volume of the information signals, use the Ready in button while the programme selector remains at position 2.
■ To change the volume of the button signals, rotate the programme selector to position 3. Use the Ready in button again to change the volume.
2 Cleaning and maintenance
Cleaning and maintenance
: Warning
Risk of death!
: Warning
Risk of poisoning!
Caution!
Damage to the appliance
Notes
■ Ensure the room in which the washing machine is set up is well ventilated.
■ Leave the door and detergent drawer open slightly when the washing machine is not in use.
■ Occasionally run a wash using the Cottons 60 °C programme with washing powder.
Machine housing/control panel
■ Wipe the housing and the control panel with a soft, damp cloth.
■ Remove the detergent residue immediately.
■ Do not clean with a water jet.
Drum
Descaling
Detergent drawer and housing
1. Pull out the detergent drawer. Press down the insert and fully remove the drawer.
2. Remove the insert.
a) Push the insert upwards from below with your finger.
b) If the measuring aid for liquid detergent is used, pull it upwards.
3. Clean the detergent drawer and insert with water and a brush, and dry it. Clean the inside of the housing as well.
4. Fit the insert and lock it into place.
a) Push the cylinder onto the guide pin.
b) If the measuring aid* for liquid detergent is used, slide it forwards, fold down and click into place.
5. Push in the detergent drawer.
Note:
Drain pump is blocked
: Warning
Risk of scalding!
After the water has cooled down:
1. Turn off the water tap so that no more water can flow in and has to be drained via the drain pump.
2. Switch off the appliance. Disconnect the mains plug.
3. Open and remove the service flap.
4. Take the drain hose out of the retainer.
5. Carefully unscrew the pump cover; residual water may leak out.
6. Place the service flap back on, lock it into place, and close it.
Note:
Drain hose at the siphon is blocked
1. Switch off the appliance. Disconnect the mains plug.
2. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out.
3. Clean the drain hose and siphon connecting piece.
4. Reattach the drain hose and secure the connection using the hose clamp.
Filter in the water supply is blocked
: Warning
Risk of electric shock!
1. Turn off the tap.
2. Select any programme (except Rinse/Spin/Drain/Empty).
3. Press the Start Reload A button. Allow the programme to run for approximately 40 seconds.
4. Turn the programme selector to the off position. Disconnect the mains plug.
5. Clean the filter on the tap:
6. For standard and Aqua-Secure models, clean the filter on the rear of the appliance:
7. Insert the filter, connect the hose and check for leaks.
3 Faults and what to do about them
Faults and what to do about them
Emergency release
Note:
: Warning
Risk of scalding!
: Warning
Risk of injury!
Caution!
Water damage
If the laundry has to be removed, the washing machine door can be opened as follows:
1. Switch off the appliance. Disconnect the mains plug.
2. Drain the water.
3. Pull the emergency release downwards with a tool and release.
Information on the display panel
Display
Cause/remedy
Faults and what to do about them
Faults
Cause/Remedy
Note:
Note:
4 After-sales service
After-sales service
■ On the inside of the loading door or the service flap
■ On the back of the appliance
J Technical data
Technical data
r Aqua-Stop warranty
Aqua-Stop warranty
1. If water damage is caused due to a fault in our Aqua-Stop system, we will compensate domestic customers for the damage caused.
2. The liability guarantee is valid for the service life of the appliance.
3. It is a prerequisite of all warranty claims that the appliance with Aqua- Stop must have been installed and connected correctly in accordance with our instructions; this also includes a correctly fitted Aqua-Stop extension (genuine accessories).
4. Appliances with Aqua-Stop do not need to be supervised during operation, nor secured afterwards by turning off the tap.
Page 1/40
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40
Contents
Table of Contents
Search
Previous
Next
Bookmarks
en
Instruction Manual and Installation Instructions
Washing machine
WAN...
Loading ...
Loading ...
Loading ...
File type: PDF
File name: 41127939_wan20050il-19.pdf
File size: 3.94 MB
File Language: English
Pages: 40
Author: Bosch
File created: 2017-02-02
Published: 2023-12-22
Updated: 2023-12-21
Download File
Other documents for Bosch WAN20050IL/24
The following documents are available:
User Manual
User Manual - (English)
Read Online
|
Download pdf
Photos
Photos:
View Photos
Specifications
Brand:
Bosch
Model: WAN20050IL/24
Category:
Washers & Dryers
View in the file:
Full Specifications
See other models:
MFW1501/01
SHX43R56UC
KGS3001EU/52
GSL1100/42
HGD423120Q/09
Related Products
Bosch WAN20050IL/14
Bosch WAN20050IL/29
Bosch WAN20050IL/25
Bosch WAN20050IL/31
Bosch WAN20050IL/19
Bosch WAN20050IL/05
Bosch WAN20050IL/01
Bosch WAN20050IL/03
Bosch WAN20050IL/02
Bosch WAN28K00
Bosch WAX15060TI/24
Bosch WAN28200GB
Bosch WAN28000GB
Bosch WAN28250GB
Bosch WAN24000GB
Table of Contents
×
Your new washing machine
2
Display rules
2
: Warning!
2
Caution!
2
Note/tip
2
1. 2. 3. / a) b) c)
2
■ / -
2
Contentsen Instruction Manual and Installation Instructions
3
8 Intended use 4
3
( Safety instructions 5
3
7 Environmental protection 11
3
5 Positioning and connecting 11
3
* Getting to know the appliance 19
3
Z Laundry 22
3
C Detergent 23
3
0 Programme default settings 24
3
\ Additional programme settings 25
3
1 Operating the appliance 26
3
H Sensors 30
3
Q Appliance settings 31
3
2 Cleaning and maintenance 31
3
3 Faults and what to do about them 34
4
4 After-sales service 39
4
J Technical data 39
4
r Aqua-Stop warranty 39
4
8 Intended use
4
Intended use
4
■ This appliance is intended for private domestic use only.
4
■ Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoor conditions. There is a risk that the appliance will be damaged if residual water in it freezes. If hoses freeze up, they may crack/burst.
4
■ This appliance must only be used for washing domestic laundry, consisting of machine-washable items and hand-washable woollens (see label on item). Using the appliance for any other purpose is outside of the scope of its intended application and ...
4
■ This appliance is suitable for operation with mains water and commercially available detergents and care products (must be suitable for use in washing machines).
4
■ This appliance is intended for use up to a maximum height of 4000 metres above sea level.
4
( Safety instructions
5
Safety instructions
5
Children/people/pets
5
: Warning
5
Risk of death!
5
■ The appliance may be used by children over the age of 8 years and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge as long as they are supervised or have received instruction on how...
5
■ Children must not play with this appliance.
5
■ Do not allow children to clean or maintain this appliance unsupervised.
5
■ Keep children under 3 years and pets away from this appliance.
5
■ Do not leave the appliance unattended when children or other people who are unable to assess the risks are in the vicinity.
5
: Warning
5
Risk of death!
5
■ Do not position the appliance behind a door, as this may obstruct the appliance door or prevent it from opening completely.
5
■ Once an appliance has reached the end of its life, pull the mains plug from the socket before severing the mains cable, and then destroy the lock on the appliance door.
5
: Warning
5
Risk of suffocation!
5
: Warning
6
Risk of poisoning!
6
: Warning
6
Risk of burns!
6
: Warning
6
Eye/skin irritation!
6
Installation
6
: Warning
6
Risk of electric shock/fire/ material damage/damage to the appliance!
6
■ The mains voltage on your power socket matches the rated voltage specified on the appliance (identification plate). The connected loads and the required fuse protection are specified on the identification plate.
6
■ The appliance is only connected to a source of alternating current via a nationally recognized and grounded outlet that has been correctly installed.
6
■ The mains plug and the grounded socket match and the earthing system has been correctly installed.
6
■ The cross section of the cable is sufficiently large enough.
6
■ The mains plug is accessible at all times.
6
■ If using a residual current circuit breaker, only use one that bears the following mark: z. The presence of this mark is the only way to be sure that it fulfils all the applicable regulations.
6
: Warning
6
Risk of electric shock/fire/ material damage/damage to the appliance!
6
: Warning
7
Risk of fire/material damage/ damage to the appliance!
7
: Warning
7
Risk of injury/material damage/damage to the appliance!
7
: Warning
7
Risk of injury!
7
Caution!
8
Material damage/damage to the appliance
8
Operation
8
: Warning
8
Risk of explosions/fire!
8
: Warning
8
Risk of poisoning!
8
: Warning
9
Risk of injury!
9
: Warning
9
Risk of scalding!
9
: Warning
9
Eye/skin irritation!
9
Caution!
9
Material damage/damage to the appliance
9
Cleaning/Maintenance
10
: Warning
10
Risk of death!
10
■ Switch off the appliance. Disconnect the appliance from the power supply (pull out the plug).
10
■ Never take hold of the mains plug with wet hands.
10
■ When removing the mains plug from the socket, always take hold of the plug itself and never the mains cable, otherwise this may damage the mains cable.
10
■ Do not make any technical modifications to the appliance or its features.
10
■ Repairs and any other work on the appliance must only be conducted by our customer service or by an electrician. The same applies for replacing the mains cable (when necessary).
10
■ Spare mains cables can be ordered from our customer service.
10
: Warning
10
Risk of poisoning!
10
: Warning
10
Risk of electric shock/material damage/damage to the appliance!
10
: Warning
10
Risk of injury/material damage/damage to the appliance!
10
Caution!
10
Material damage/damage to the appliance
10
■ Do not allow these agents to come into contact with the surfaces of the appliance.
10
■ Clean the appliance with nothing but water and a soft, damp cloth.
11
■ Remove any detergent, spray or other residues immediately.
11
7 Environmental protection
11
Environmental protection
11
Packaging/used appliance
11
Tips on economical use
11
■ For optimum energy and water savings, fill the appliance with the maximum amount of laundry for each programme.
11
■ Wash normally soiled laundry without a prewash.
11
■ Save energy and detergent when washing lightly and normally soiled laundry. ~ "Detergent" on page 23
11
■ The temperatures which can be selected refer to the care labels on the textiles. The temperatures used in the machine may deviate from this to ensure you get the optimum combination of energy-saving and washing results.
11
■ In order to save energy, the appliance switches to energy saving mode. The display panel lighting goes out after a few minutes and the Start Reload A button flashes. ~ "Display panel" on page 20
11
■ If the laundry is subsequently dried in a tumble dryer, select the spin speed according to the tumble dryer manufacturer's instructions.
11
5 Positioning and connecting
11
Positioning and connecting
11
Included with the appliance
11
Notes
11
■ Check the machine for transport damage. Never use a damaged machine. If you have any complaints, contact the dealer from whom you purchased the appliance or our after-sales service.
11
■ Moisture inside the drum is due to final testing.
11
■ Standard
12
■ Aqua-Secure
12
■ Aqua-Stop
12
■ Operating and installation instructions + supplementary sheet for the operating and installation instructions
12
■ After-sales service location directory*
12
■ Warranty*
12
■ Cover caps for openings after the transport locks have been removed
12
■ Measuring aid* for liquid detergent
12
■ Adapter with sealing washer from 21 mm = ½" to 26.4 mm = ¾" *
12
Useful tools
12
■ Spirit level for aligning
12
■ Spanner with:
12
Safety instructions
12
: Warning
12
Risk of injury!
12
Caution!
13
Damage to the appliance
13
Caution!
13
Water damage
13
Notes
13
■ In addition to the safety information listed here, the local water and electricity supplier may have special requirements.
13
■ If in doubt, have the appliance connected by a specialist.
13
Installation surface
13
Note:
13
■ The installation surface must be firm and level.
13
■ Soft floors/floor coverings are not suitable.
13
Installation on a base or a wooden joist floor
13
Caution!
13
Damage to the appliance
13
Note:
13
■ In a corner, if possible,
13
■ On a water-resistant wooden board (min. 30 mm thick) which is screwed tightly to the floor.
13
Installation on a platform with drawer
13
Installing the appliance in a kitchenette
13
: Warning
13
Risk of death!
13
Notes
13
■ Recess width of 60 cm required.
13
■ Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets.
13
Removing the transport locks
14
Caution!
14
Damage to the appliance
14
Note:
14
1. Take the hoses out of the holders.
14
2. Remove the mains cable from the holders. Unscrew and remove all four transport lock screws.
14
3. Fit the covers. Lock the covers firmly in place by applying pressure to the snap-in hooks.
14
Hose and cable lengths
14
■ Left-hand connection
14
■ Right-hand connection
14
Tip:
15
Water inlet
15
: Warning
15
Risk of electric shock!
15
Notes
15
■ Only operate the washing machine using cold mains water.
15
■ Do not connect the machine to the mixer tap of an unpressurised hot- water boiler.
15
■ Do not use a used supply hose. Only use the supply hose supplied or one that was purchased from an authorised specialist retailer.
15
■ Do not kink or squash the water supply hose.
15
■ Do not alter (shorten, cut through) the water supply hose (otherwise, its strength is no longer guaranteed).
15
■ Only tighten the screw connections by hand. If the screw connections are tightened too much with a tool (pliers), the thread may become damaged.
15
■ When connecting to a 21 mm = ½" tap, first fit an adapter with a sealing washer from 21 mm = ½" to 26.4 mm = ¾".
15
■ Model: Standard
15
■ Model: AquaSecure
15
■ Model: Aqua-Stop
16
Note:
16
Water outlet
16
Caution!
16
Water damage
16
Notes
16
■ Do not kink the water drain hose or put strain on it lengthways.
16
■ Height difference between the installation surface and the drain: min. 60 cm, max. 100 cm
16
■ Outlet in a sink
16
: Warning
16
Risk of scalding!
16
Caution!
16
Damage to the appliance/fabrics
16
■ Drainage into a siphon
16
Levelling
16
1. Loosen the lock nuts using a wrench, by turning it in a clockwise direction.
16
2. Check the alignment of the washing machine with a spirit level, and adjust it if necessary. Change the height by turning the appliance feet.
16
3. Tighten the lock nut against the housing.
17
Electrical connection
17
: Warning
17
Risk of death!
17
Notes
17
■ The mains voltage and voltage indicated on the washing machine (rating plate) are the same.
17
■ The washing machine is only connected to an alternating current supply via a properly installed earthed socket.
17
■ The mains plug fits the socket.
17
■ The cable cross-section is adequate.
17
■ The earthing system is properly installed.
17
■ The mains cable is only replaced by a qualified electrician (if this is necessary). Replacement mains cables are available from the after- sales service.
17
■ No multiple plugs/couplings or extension cables are used.
17
■ If an earth-leakage circuit breaker is used, only a type which displays the z symbol is used.
17
■ The mains plug can be accessed at all times.
17
■ The mains cable is not kinked, squashed, altered or cut through.
17
■ The mains cable does not come into contact with heat sources.
17
Before washing for the first time
17
Note:
17
1. Check the appliance.
17
Note:
17
2. Remove the protective foil from the worktop and the control panel.
17
3. Connect the mains plug.
17
4. Turn on the water tap.
17
5. Do not load any laundry. Close the door.
17
6. Run the Cottons 90 °C programme.
18
7. Open the detergent drawer.
18
8. Pour approximately 1 litre of water into compartment II.
18
9. Pour standard detergent into compartment II.
18
Note:
18
10. Close the detergent drawer.
18
11. Press the Start Reload A button.
18
12. When the programme ends, switch off the appliance.
18
Transportation
18
1. Turn off the water tap.
18
2. Reduce the water pressure in the supply hose.
18
3. Drain the remaining detergent solution.
18
4. Disconnect the washing machine from the mains.
18
5. Remove the hoses.
18
1. Remove the covers and keep them in a safe place.
18
2. Insert all four sleeves.
18
Notes
18
■ The transport locks must be removed. ~ "Removing the transport locks" on page 14
18
■ To prevent unused detergent from flowing straight into the drain during the next wash: Pour approx. 1 litre of water into compartment II and start the Drain/Empty programme.
18
* Getting to know the appliance
19
Getting to know the appliance
19
Washing machine
19
Control panel
20
Display panel
20
Note:
20
Button
20
Display indicator
20
Description
20
More information on the display panel
21
Display indicator
21
Description
21
Note:
21
Z Laundry
22
Laundry
22
Preparing the laundry
22
Caution!
22
Damage to the appliance/fabrics
22
■ Empty any pockets.
22
■ Check for metal items (paper clips, etc.) and remove them.
22
■ Wash delicates in a laundry bag (tights, underwired bras, etc.).
22
■ Remove curtain fittings or place curtains in a laundry bag.
22
■ Close any zips, button up any cover buttons.
22
■ Brush sand out of pockets and collars.
22
Sorting laundry
22
■ Type of fabric/fibre
22
■ Colour
22
Note:
22
■ Soiling Wash laundry with the same level of soiling together.
22
■ Symbols on the care labels
22
Note:
22
Starching
23
Note:
23
Dyeing/bleaching
23
Soaking
23
1. Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions.
23
2. Select the desired programme.
23
3. Press the Start Reload A button to start the programme.
23
4. After approx. ten minutes, press the Start Reload A button to pause the programme.
23
5. After the desired soaking time, press the Start Reload A button again to continue or change the programme.
23
Notes
23
■ Load laundry of the same colour.
23
■ No additional detergent is required; the soaking solution is used for washing.
23
C Detergent
23
Detergent
23
Correct selection of detergent
23
■ Standard detergent with optical brighteners
23
■ Detergent for colours without bleach or optical brighteners
23
■ Detergent for colours/delicates without optical brighteners
23
■ Detergent for delicates
23
■ Detergent for woollens
23
Saving energy and detergent
24
Saving
24
Soiling/note
24
Note:
24
0 Programme default settings
24
Programme default settings
24
Note:
24
Spin speed
24
Note:
25
Ready in
25
1. Select a programme.
25
2. Press the Ready in button repeatedly until the required number of hours is displayed.
25
3. Press the Start Reload A button.
25
Note:
25
1. Press the Start Reload A button.
25
2. Use the Ready in button to change the number of hours.
25
3. Press the Start Reload A button.
25
Note:
25
■ Programme settings,
25
■ Detergent dosage (additional rinse cycles if required due to foaming),
25
■ Load size/type of textiles (longer washing for higher load and for textiles which absorb more water),
25
■ Imbalances (e. g. due to fitted sheets) are offset with several start- ups of spin cycles,
25
■ Fluctuations in power supply,
25
■ Water pressure (infeeding speed).
25
\ Additional programme settings
25
Additional programme settings
25
Speed Eco
25
■ Speed
25
Note:
25
■ Eco
25
1 Operating the appliance
26
Operating the appliance
26
Preparing the washing machine
26
Notes
26
■ The washing machine must be correctly installed and connected. ~ "Positioning and connecting" on page 11
26
■ Before washing for the first time, run a wash cycle without laundry. ~ "Before washing for the first time" on page 17
26
1. Connect the mains plug.
26
2. Turn on the water tap.
26
3. Open the door.
26
4. Check that the drum is completely drained. Drain if necessary.
26
Switching on the appliance/ selecting a programme
26
Note:
26
Changing the programme default settings
26
Selecting additional programme settings
26
Placing laundry into the drum
27
: Warning
27
Risk of death!
27
Notes
27
■ Mix items of laundry of varying sizes. Laundry items of different sizes distribute themselves better during the spin cycle. Individual items of laundry may lead to imbalances.
27
■ Observe the specified maximum load. Overfilling has a negative impact on the washing result and promotes creasing.
27
1. Place presorted items of laundry unfolded in the washing drum.
27
2. Make sure that no items of laundry are trapped between the washing machine door and the rubber seal, and close the door.
27
Measuring and adding detergent and care products
27
Caution!
27
Damage to the appliance
27
Dosing
27
■ Water hardness (ask your water supply company)
27
■ The manufacturer's instructions on the packaging
27
■ The amount of laundry
27
■ Soiling
27
Filling
27
: Warning
27
Eye/skin irritation!
27
Note:
27
1. Pull out the detergent drawer as far as possible.
28
2. Add detergent and/or care products.
28
3. Close the detergent drawer.
28
Measuring aid for liquid detergent
28
1. Pull out the detergent drawer. Press down the insert and fully remove the drawer.
28
2. Slide the measuring aid forwards, fold it down and click it into place.
28
3. Reinsert the drawer.
28
Note:
28
Starting the programme
28
Foam detection
28
Note:
28
Childproof lock
28
■ E lights up: The childproof lock is active.
29
■ E flashes: The childproof lock is active and the programme selector has been adjusted. If you reset the programme selector to the initial programme, the symbol lights up again.
29
Notes
29
■ To avoid the programme to terminate, do not turn the programme selector beyond the off position. If the appliance is switched off while the programme is running and childproof lock is activated, the programme continues when the appliance is switc...
29
■ To remove the laundry at the end of the programme, deactivate the childproof lock.
29
■ The childproof lock remains active, even once the washing machine has been switched off.
29
Adding/removing laundry
29
■ If the è symbol disappears in the display panel, the washing machine door is unlocked. You can add or remove laundry.
29
Notes
29
■ If the è symbol lights up in the display panel, it is not possible to add or remove laundry.
29
Note:
29
Changing the programme
29
1. Press the Start Reload A button.
29
2. Select another programme.
29
3. Press the Start Reload A button. The new programme starts from the beginning.
29
Cancelling the programme
29
1. Press the Start Reload A button.
29
2. To cool down laundry: Select Rinse.
29
3. Press the Start Reload A button.
29
1. Press the Start Reload A button.
29
2. Select Drain/Empty.
29
3. Press the Start Reload A button.
29
Programme end during Rinse Stop
29
■ Pressing the Start Reload A button (the laundry will be spun with the default spin speed setting) or
29
■ Selecting a spin speed or setting the programme selector to Drain/Empty and then pressing the Start Reload A button.
30
Programme end
30
Removing laundry/switching off the appliance
30
1. Turn the programme selector to the off position. The appliance is switched off.
30
2. Open the door and remove the laundry.
30
3. Turn off the tap.
30
Note:
30
Notes
30
■ Always wait until the programme ends, as the appliance could still be locked.
30
■ At the end of the programme, the appliance switches to energy saving mode. The lighting goes out and the Start Reload A button flashes. Press any button to activate the panel.
30
■ Do not leave any items of laundry in the drum. They may shrink in the next wash or discolour another item.
30
■ Remove any foreign objects from the drum and the rubber seal – risk of rusting.
30
■ Wipe the rubber seal and the washing machine door dry.
30
■ Leave the door and detergent drawer open so that any residual water can evaporate.
30
H Sensors
30
Sensors
30
Automatic load sensing
30
Unbalanced load detection system
30
Note:
30
Q Appliance settings
31
Appliance settings
31
■ The volume of the information signals (e.g. at the end of the programme) and/or
31
■ The volume of the button signals.
31
Activating the setting mode
31
1. Turn the programme selector to position 1. The washing machine is switched on.
31
2. Press the Start Reload A button and, at the same time, turn the programme selector clockwise to position 2. Release the button.
31
Changing the volume
31
■ To change the volume of the information signals, use the Ready in button while the programme selector remains at position 2.
31
■ To change the volume of the button signals, rotate the programme selector to position 3. Use the Ready in button again to change the volume.
31
2 Cleaning and maintenance
31
Cleaning and maintenance
31
: Warning
31
Risk of death!
31
: Warning
31
Risk of poisoning!
31
Caution!
31
Damage to the appliance
31
Notes
31
■ Ensure the room in which the washing machine is set up is well ventilated.
31
■ Leave the door and detergent drawer open slightly when the washing machine is not in use.
31
■ Occasionally run a wash using the Cottons 60 °C programme with washing powder.
31
Machine housing/control panel
32
■ Wipe the housing and the control panel with a soft, damp cloth.
32
■ Remove the detergent residue immediately.
32
■ Do not clean with a water jet.
32
Drum
32
Descaling
32
Detergent drawer and housing
32
1. Pull out the detergent drawer. Press down the insert and fully remove the drawer.
32
2. Remove the insert.
32
a) Push the insert upwards from below with your finger.
32
b) If the measuring aid for liquid detergent is used, pull it upwards.
32
3. Clean the detergent drawer and insert with water and a brush, and dry it. Clean the inside of the housing as well.
32
4. Fit the insert and lock it into place.
32
a) Push the cylinder onto the guide pin.
32
b) If the measuring aid* for liquid detergent is used, slide it forwards, fold down and click into place.
33
5. Push in the detergent drawer.
33
Note:
33
Drain pump is blocked
33
: Warning
33
Risk of scalding!
33
After the water has cooled down:
33
1. Turn off the water tap so that no more water can flow in and has to be drained via the drain pump.
33
2. Switch off the appliance. Disconnect the mains plug.
33
3. Open and remove the service flap.
33
4. Take the drain hose out of the retainer.
33
5. Carefully unscrew the pump cover; residual water may leak out.
33
6. Place the service flap back on, lock it into place, and close it.
33
Note:
33
Drain hose at the siphon is blocked
34
1. Switch off the appliance. Disconnect the mains plug.
34
2. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out.
34
3. Clean the drain hose and siphon connecting piece.
34
4. Reattach the drain hose and secure the connection using the hose clamp.
34
Filter in the water supply is blocked
34
: Warning
34
Risk of electric shock!
34
1. Turn off the tap.
34
2. Select any programme (except Rinse/Spin/Drain/Empty).
34
3. Press the Start Reload A button. Allow the programme to run for approximately 40 seconds.
34
4. Turn the programme selector to the off position. Disconnect the mains plug.
34
5. Clean the filter on the tap:
34
6. For standard and Aqua-Secure models, clean the filter on the rear of the appliance:
34
7. Insert the filter, connect the hose and check for leaks.
34
3 Faults and what to do about them
34
Faults and what to do about them
34
Emergency release
34
Note:
34
: Warning
34
Risk of scalding!
34
: Warning
35
Risk of injury!
35
Caution!
35
Water damage
35
If the laundry has to be removed, the washing machine door can be opened as follows:
35
1. Switch off the appliance. Disconnect the mains plug.
35
2. Drain the water.
35
3. Pull the emergency release downwards with a tool and release.
35
Information on the display panel
36
Display
36
Cause/remedy
36
Faults and what to do about them
37
Faults
37
Cause/Remedy
37
Note:
37
Note:
38
4 After-sales service
39
After-sales service
39
■ On the inside of the loading door or the service flap
39
■ On the back of the appliance
39
J Technical data
39
Technical data
39
r Aqua-Stop warranty
39
Aqua-Stop warranty
39
1. If water damage is caused due to a fault in our Aqua-Stop system, we will compensate domestic customers for the damage caused.
39
2. The liability guarantee is valid for the service life of the appliance.
39
3. It is a prerequisite of all warranty claims that the appliance with Aqua- Stop must have been installed and connected correctly in accordance with our instructions; this also includes a correctly fitted Aqua-Stop extension (genuine accessories).
39
4. Appliances with Aqua-Stop do not need to be supervised during operation, nor secured afterwards by turning off the tap.
39
Search:
×
Search
