Loading ...
Loading ...
Loading ...
Installation16
English
STEP 4 Connect to a water source
(applicable models only)
CAUTION
• The new hose-sets supplied with the appliance
are to be used and that old hose-sets should
not be reused.
• The water line must be connected by a qualified
technician.
• The warranty for your refrigerator does not
cover the water line installation. The water line
installation will be performed at your own costs
unless the installation fee is included in the
retailer’s price.
• Samsung takes no responsibility for the water
line installation. If water leaks occur, contact
the installer of the water line.
To connect the cold water pipe to the water
filtering hose
CAUTION
Make sure the water filtering hose is connected
to a cold, potable water source pipe. Connecting
to the hot water pipe may cause the purifier to
malfunction.
1
A
B
A
A. Close Main Water pipe
B. No gap
1. Shut off the water supply by closing the main
water valve.
2. Locate the cold, potable water pipe (1).
3. Follow the Water Line Installation to connect to
the water pipe.
4. When connection is complete, open the main
water valve and dispense about 3 liters of water.
This is to remove impurities inside the pipe.
To connect the water filtering hose to the
water line
Remove cap
a
a
A
B
03
a
A. Water Line from unit
B. Water Line from Kit
1. Loosen and remove the compression nut (a)
from the water line of the refrigerator, and
insert it to the water filtering hose.
2. Tighten up the compression nut (a) to connect
the water filtering hose and the water line.
3. Open the main water valve and check for any
leaks.
4. If there are no leaks, dispense about a 3 liters
of water before actually using the refrigerator
to remove impurities inside the water filtering
system.
Simple_A5_T-TYPE_RF5000C_DA68-04755C-01_EN.indd 16 2023-06-15 10:54:20
Loading ...
Loading ...
Loading ...