LHT218C1 INSTRUCTION MANUAL

Loading ...

ENGLISH

0-15

Fig. H

3. LEVEL HEDGES (Fig. I) – To obtain exceptionally level

hedges, a piece of string can be stretched along the

length of the hedge as aguide.

Fig. I

4. SIDE-TRIMMING HEDGES (Fig. J) – Begin at the

bottom and sweepup.

Fig. J



WARNING: TO GUARD AGAINST INJURY,

OBSERVE THE FOLLOWING:

• READ INSTRUCTION MANUAL BEFORE USING,

SAVE INSTRUCTIONMANUAL.

• CHECK THE HEDGE FOR FOREIGN OBJECTS SUCH

AS WIRE OR FENCES BEFORE EACHUSE.

• KEEP HANDS ON HANDLES. DON’TOVERREACH.

• DO NOT USE UNDER WETCONDITIONS.



DANGER:

KEEP HANDS AWAY FROMBLADES.



CAUTION:

BLADE COASTS AFTER TURNOFF.

MAINTENANCE



WARNING: Remove extension cord

from trimmer before servicing, cleaning or removing

material from the gardeningappliance.

The cutting blades are made from

Fig. K

high quality, hardened steel and

with normal usage, they will not

require resharpening. However, if

you accidentally hit a wire fence

(Fig. K), stones, glass or other hard

objects, you may put a nick in the

blade. There is no need to remove

this nick as long as it does not

interfere with the movement of the

blade. If it does interfere, unplug

the cord and use a fine toothed file or sharpening stone to

remove the nick. If you drop the trimmer, carefully inspect it

for damage. If the blade is bent, housing cracked, or handles

broken or if you see any other condition that may affect the

trimmer’s operation contact your local BLACK+DECKER

Service Center for repairs before putting it back intouse.

Fertilizers and other garden chemicals contain agents which

greatly accelerate the corrosion of metals. Do not store the

unit on or adjacent to fertilizers orchemicals.

Cleaning



WARNING: Blow dirt and dust out of all

air vents with clean, dry air at least once a week. To

minimize the risk of eye injury, always wear ANSI Z87.1

approved eye protection when performingthis.



WARNING: Never use solvents or other

harsh chemicals for cleaning the non-metallic parts

of the tool. These chemicals may weaken the plastic

materials used in these parts. Use a cloth dampened

only with water and mild soap. Never let any liquid

get inside the tool; never immerse any part of the tool

into aliquid.

Repairs

The charger and battery pack are notserviceable.



WARNING: To assure product

SAFETY and RELIABILITY, repairs, maintenance

and adjustment (including brush inspection

and replacement) should be performed by

a BLACK+DECKER factory service center or a

BLACK+DECKER authorized service center. Always use

identical replacementparts.

Loading ...

INSTRUCTION MANUAL - Page 11