Loading ...
Loading ...
Loading ...
ENGLISH
8
OPERATION
WARNING: To reduce the risk of
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can causeinjury.
Installing and Removing the Battery Pack
(Fig.D)
NOTE: For best results, make sure your battery pack is
fullycharged.
To install the battery pack into the tool handle, align the
battery pack with the rails inside the tool’s handle and slide
it into the handle until the battery pack is firmly seated in
the tool and ensure that it does notdisengage.
To remove the battery pack from the tool, press the release
button and firmly pull the battery pack out of the tool
handle. Insert it into the charger as described in the charger
section of thismanual.
Fig. D
Proper Hand Position (Fig. E)
WARNING: To reduce the risk of serious
personal injury, ALWAYS use proper hand position
as shown.
WARNING: To reduce the risk of serious
personal injury, ALWAYS hold securely in anticipation
of a suddenreaction.
Always hold the trimmer, as shown in the illustrations in this
manual, with one hand on the switch handle
3
and one
hand on the bail handle
5
(Fig. E). Never hold the unit by
the bladeguard
4
.
Fig. E
4
53
Switch
To turn the tool “ON”, slide the lock off button
2
, shown in
Figure F, backward and squeeze the trigger switch
1
Once
the unit is running, you may release the lock off button
2
.
In order to keep the unit running you must continue
to squeeze the trigger. To turn the tool “OFF”, release
thetrigger.
WARNING: Never attempt to lock a
switch in the ONposition.
Fig. F
1
2
Trimming Instructions
1. WORKING POSITION (Fig. G) – Maintain proper
footing and balance and do not overreach. Wear safety
goggles, non-skid footwear and rubber gloves when
trimming. Hold the tool firmly in both hands and turn
the tool ON. Always hold the trimmer, as shown in
Figure E, with one hand on the switch handle and one
hand on the bail handle. Never hold the tool by the
bladeguard.
Fig. G
2. TRIMMING NEW GROWTH– (Fig. H) – A wide,
sweeping motion, feeding the blade teeth through the
twigs is most effective. A slight downward tilt of the
blade, in the direction of motion gives the bestcutting.
CAUTION: Do not cut stems greater than
3/4" (19mm). Use the trimmer only for cutting normal
shrubbery around houses andbuildings.
Loading ...
Loading ...
Loading ...