Loading ...
Loading ...
Loading ...
Appliance door en
27
4. Lift the panel up and pull it out (fig. C).
Clean the panels with glass cleaner and a soft cloth.
:Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Installation
During installation, make sure that the lettering "top
right" is upside down at the bottom left.
1. Insert the panel at an angle towards the back
(fig. A).
2. Insert the top panel at an angle towards the back
into the brackets. The smooth surface must face
outwards. (fig. B).
3. Put the cover back in
place and press on it.
4. Attach the oven door.
Do not use the oven again until the panels have been
correctly installed.
Upper glass cover
Before opening the top cover, remove any spills with a
cloth.
Use glass cleaner if possible.
For cleaning, remove the top cover. To do this, hold the
cover securely on both sides with both hands and pull it
upwards.
If the cover hinges become loose, note the letters
marked on them. The hinge with the letter R must be
fitted on the right, and the hinge with the letter L must
be fitted on the left.
After cleaning, re-assemble the top cover following the
same procedure in reverse order.
Only close the top cover once the burners have cooled
down.
:Warning – Risk of injury!
A scratched glass cover may break and fragment. Do
not use glass scrapers, sharp or abrasive cleaning aids,
or harsh cleaning products.
&
%
$
Loading ...
Loading ...
Loading ...