Loading ...
Loading ...
Loading ...
5
English
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When using this appliance, basic safety
precautions should always be followed including
thefollowing:
• Read all the instructions before using theproduct.
• To reduce the risk of injury, close supervision is
necessary when a product is used nearchildren.
• Know how to stop the product and bleed
pressures quickly. Be thoroughly familiar with
thecontrols.
• Stay alert – watch what you aredoing.
• Do not operate the product when fatigued or under
the influence of alcohol ordrugs.
• Keep operating area clear of allpersons.
• Do not overreach or stand on unstable support.
Keep good footing and balance at alltimes.
• Follow the maintenance instructions specified in
themanual.
WARNING: Risk of Injection or Injury– Do Not Direct
Discharge Stream AtPersons.
WARNING: Risk of Injection or Severe Injury – Keep
Clear of Nozzle – Do Not Direct Discharge Stream
at Persons – This Product Is To Be Used Only By
TrainedOperators.
SAVE THESE INSTRUCTIONS
WARNING: Read this entire manual before attempting
to assemble, operate or install the product.
WARNING: This unit was designed for specific
applications. It should not be modified and/or used for
any application other than that which it was designed.
NOTICE: Always store your pressure washer in
a location where the temperature will not fall
below40°F(4°C). freeze damage is not covered by the
warranty.
1 . Avoid accidental starts. Move switch on unit to OFF
position before connecting or disconnecting batterypack.
2 . Water spray must never be directed towards any electric
wiring or fatal electric shock mayoccur.
3 . The narrow pin point stream is very powerful. It is not
recommended for use on painted surfaces, wood surfaces
or items attached with an adhesivebacking.
4 . Keep operating area clear of all persons andanimals.
5 . Always use both hands when operating pressure washer to
maintain complete control of thewand.
6 . Do not touch nozzle or water spray while operating.
Never place hands in front ofnozzle.
7 . Wear safety goggles while operating. Wear
protective clothing and footwear to protect against
accidentalspraying.
8 . Disconnect battery pack when not in use and prior to the
detaching of the high pressurehose.
9 . Do not operate or store this product in temperatures
below 40°F(4°C). Freeze damage is not covered by
thewarranty.
before use. Many accidents are caused by poorly
maintained pressurewasher.
e ) Use the pressure washer, accessories and tool bits
etc. in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the pressure washer for
operations different from those intended could result in
a hazardoussituation.
f ) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpectedsituations.
5) Battery Tool Use and Care
a ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another batterypack.
b ) Use pressure washers only with specifically
designated battery packs. Use of any other battery
packs may create a risk of injury andfire.
c ) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or afire.
d ) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
orburns.
e ) Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire,
explosion or risk ofinjury.
f ) Do not expose a battery pack or tool to
fire or excessive temperature. Exposure to
fire or temperature above 265°F (130°C) may
causeexplosion.
g ) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside the
specified range may damage the battery and increase
the risk offire.
6) Service
a ) Have your pressure washer serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the pressure
washer ismaintained.
b ) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized serviceproviders.
Loading ...
Loading ...
Loading ...