Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 10991477A287/C
e
2. Replace the front part of the frame in
housing A on the side wall near the opening
of the oven cavity.
3. Screw in the front fixing pin (you can help
yourself with a tool, e.g. a coin).
4. Repeat the operation for the frame placed
on the other side wall.
Vapor Clean (on some models only)
Preliminary operations
Before starting the Vapor Clean function:
• Completely remove all accessories from
inside the oven.
• If present, remove the temperature probe.
• If present, remove the self-cleaning panels.
• Close the door.
• During the assisted cleaning cycle, wash the
self-cleaning panels (where fitted), which
were previously removed, separately in
warm water and a small amount of
detergent.
Vapor Clean cycle setting
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Select VAPOR CLEAN .
3. Touch the START button to start the
reservoir filling procedure.
4. Proceed with reservoir filling as described
above.
Vapor Clean cleaning phase
5. Touch the START button to start the
Vapor Clean function.
This stage is indicated by a progressive increase
in the cooking level.
End of Vapor Clean
At the end of the Vapor Clean function,
"Function ended" displays and a buzzer sounds
briefly, which can be deactivated by touching
any point of the display or by opening the door.
1. Touch the HOME button to quit the
function.
2. Proceed with draining the reservoir as
described above.
3. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
4. Use a non-scratch sponge with brass
filaments on tougher encrustations.
See General safety instructions.
The Vapor Clean function is an assisted
cleaning procedure which facilitates the
removal of dirt. Thanks to this process, it
is possible to clean the inside of the
oven very easily. The dirt residues are
softened by the heat and water vapour
for easier removal afterwards.
If the internal temperature is higher than
expected, the function is not activated.
Let the appliance cool down before
activating the function.
The duration and temperature of the
Vapor Clean function cannot be
changed by the user.
Loading ...
Loading ...
Loading ...