Smeg SO4606WS4PNR Wi-Fi Steam100 Pro Galileo Oven 45 cm

Instruction Manual - Page 12

For SO4606WS4PNR.

PDF File Manual, 57 pages, Read Online | Download pdf file

SO4606WS4PNR photo
Loading ...
Loading ...
Loading ...
USE - 7591477A287/C
e
etc...
Lower area
There are various shortcut function buttons in this
area, which vary according to the functions set
in the main area:
HISTORY
TIMER
LIGHT BULB
SETTINGS
In addition, depending on the page displayed,
there are other buttons, some of which are listed
below:
BACK
CONFIRM
START
REPLAY
STOP
SAVE
DELETE
RAPID PRE-HEATING
PROBE (on some models only)
Connectivity (on some models only)
Connectivity requirements:
Smartphone or PC tablet with IOS or
Android operating system. The minimum
versions of the operating systems are
available at the following link:
www.smeg.com/smegconnect/
Wi-Fi network (2.4 GHz band, WPA2
protected) active and available in the
place where the appliance is installed.
Internet connection.
Name and password of the home Wi-Fi
network or WPS (Wi-Fi Protected Setup)
mode available.
For further information, please refer to the
"Built-in oven connectivity" manual.
First use
To switch on the appliance:
1. Connect the appliance to the mains power
supply.
The manufacturer’s logo will display for a few
seconds.
The display then shows the current time setting
screen.
To be able to start any cooking function, the
current time must be set.
2. Scroll up and down through the hours and
minutes to set the current time.
3. Touch the CONFIRM button (at the
right in the lower area ) to set the
current time.
The first time you use the appliance, it may be
Press and hold the HOME button
or the ON-OFF button for a few
seconds to stop cooking immediately at
any time and return to the main menu.
The following instructions are also valid
in the case of a prolonged power
failure.
After the appliance is switched on, you
will need to wait a few seconds before
you can use it.
To change the current time (e.g. due to
daylight saving time) touch the time
shown on the display (in the information
area on the right).
When the current time is visible, after 2
minutes from the last operation by the
user it is displayed with low brightness.
Loading ...
Loading ...
Loading ...