Loading ...
Loading ...
Loading ...
Use CAUTION: Let the tool work at its own pace.
DO NOT OVERLOAD.
Switching on and off
± CAUTION.- Bladescoast after turn off.
Switching on "\
-N
• Push and hold the lock button(2) (fig.E)
tothe rightorto the leftand thensqueeze
the on/offswitch (1).
• Release the lock-off button.
Switching off
• Release the on/off switch (1). i
WA RNING"Neverattempttolocktheswitchintheonposition.
Hints for optimum use (figs. F, G, H & I)
T....._.,,.... .C. 0r |ON: Blades coast after turn off.
• In order to achieve optimum cutting results, only cut dry grass.
• Hold the tool as shown in fig. F & G. Keep your other hand well
away from the blade. Maintain a
stable working position so that you
do not slip. Do not overreach.
• When cutting long grass, work in
stages from the top. Take small cuts.
• Keep the tool away from hard
objects and delicate plants.
• Ifthe tool starts running slowly,
reduce the load.
• Tomake acloser cut, slightlytilt thetool.
• Spray thebladewith alightcoatingof
general purposeoil beforefirst useand
wheneverthe bladesbeginto lookdry.
Trimming hedges
± CAUTION: Blades coast after turn o.,
• Slightly tilt the tool (up to 15° relative to the line of cut) sothat the blade
tips point slightly towards the hedge ,r=_ \f_-. _
(fig.H). This willcause the blades to
cut more effectively.
Start by trimming the top of the hedge. \
Hold the tool at the desired angle and "
move it steadily along the lineof cut.
The double-sided blade allows you to /'
cut in either direction.
Inorder to obtain a very straight cut,
stretch a piece of string along the
length of the hedge at the desired
hei(jht. Use the st-ringas a guide line,
cutting just above it.
• Inorder to obtain flat sides, cut upwards with the growth (fig. I).
Younger stems move outwards when the blade cuts downwards,
causing shallow patches in the hedge. A
Take care to avoid any foreign objects. IMp
Especially avoid hard objecfs such as
metal wire and railings, asthese could
damage the blades.
• Regularly oil the blades.
Maintenance
Your Black& Deckertool has been
designedto operate overalong periodof
time withaminimum ofmaintenance.
Continuoussatisfactoryoperation depends
uponproper toolcareand regularcleaning.
Yourcharger does notrequireany
maintenanceapartfrom regularcleaning.
±WARNING: Beforeperformingany maintenance onthe
tool, switchoffthe tool. Unplug thecharger beforecJeaningit.
• Regularlyclean the ventilationslots inyour toolandcharger using asoft
brush ordry cloth.
• Regularlyclean the motor housingusing adamp cloth.Do not use any
abrasive or solvent-basedcleaner.
Loading ...
Loading ...
Loading ...