Loading ...
Loading ...
Loading ...
Problem
Possible Cause
Solution
Not
working
No power supply
Connect to a functioning outlet and switch
on
Water Full Indication Flashes
Drain water tank and reset it, or
re-position the water tank to right place
Room temperature ˂ 5°C,or
˃ 35 °C
Self-Protection designed to protect the
unit. Can not work under such temperature
Bad
functioning
Is the air filter clogged?
Clean the air filter as instructed
Is the intake duct or
discharge duct obstructed?
Remove the obstruction from the
discharge duct or intake duct.
No air
intake
Is the filter clogged?
Wash the filter
Loud noise
when
running
Is the machine put in the plat
place?
Put the machine on the plat ground
Is the filter clogged?
Wash the filter
E2
Humidity sensor problem
Change a sensor
LO
Environmental humidity is
below 20%
The dehumidifier shuts down for self-
protection
HI
Environmental humidity is
above 90%
CL
Low temperature protection,
the environmental
temperature＜5℃
CH
High temperature protection,
the environmental
temperature＞38℃
DECOMMISSIONING
STORAGE
Long-term storage - If you will not be using the unit for an extended period of time (more
than a few weeks) it is best to clean the unit and dry it out completely. Please store the unit
per the following steps:
1. Press power button to switch off and unplug the unit.
2. Drain the remaining water from the unit.
3. Clean the filter and let the filter dry completely in a shaded area.
4. Collect the power cord at the water tank.
5. Re-install the filter at its position.
6. The unit must be kept in upright position when in storage.
Loading ...
Loading ...
Loading ...