Plancha alisadora
profesional
PARA USO PROFESIONAL SOLAMENTE
Modelo BABSS3000T
Para su seguridad y para disfrutar
plenamente de este producto,
siempre lea cuidadosamente las
instrucciones antes de usarlo.
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be taken, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER – Any appliance is
electrically live even when the switch is off.
To reduce the risk of death by electric shock:
1. Always unplug appliance immediately after
using.
2. Do not use while ba thing or in the shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place in, or drop into water or any
other liquids.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
BABSS3000T IB-14186D.indd 1 2019/10/16 10:49 AM
WARNING – To reduce the
risk of burns, electrocution, fire, or injury to
persons:
1. This appliance should never be left
unattended when plugged in.
2. Do not pull, twist, or wrap line cord
around appliance.
3. This appliance should not be used by, on,
or near children or individuals with certain
disabilities.
4. Use this a ppliance only for its intended
use, as described in this manual. Do not
use attachments not recommended by
the manufacturer. Do not use an extension
cord to operate appliance.
5. Never operate this appliance if it has
a damaged cord or plug, if it is not
working properly, if it has been dropped
or damaged, or dropped into water.
Return the appliance to an authorized
service center for examination and
repair.
6. Keep the cord a way from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert an y object into any
opening.
9. Do not use outdoors or opera te where
aerosol (spray) products are being used or
where oxygen is being administered.
10. Do not use an extension cord with this
appliance.
11. This appliance is hot when in use. Do not
let heated surfaces touch eyes or skin.
12. Do not place the appliance on any
surface while it is operating.
13. Do not touch hot surfaces of the
appliance. Curved housing above/
below plates get hot. Do not touch
directly while iron is operating.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This appliance is intended for professional
use. Use on Alternating Current (60 Hz) only.
Standard appliances are designed to operate
at 120 volts AC.
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature,
this plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat
this safety feature.
STRAIGHTENING BASICS
1. Plug the straightening iron into a standard electrical outlet (120V). It is not necessary to touch
the iron with your hand to judge readiness.
2. Use the +/- temperature controls to select the setting for your hair type. You can use the chart
outlined below as a reference. The iron will heat up very quickly.
TEMPERATURE SETTINGS HAIR TYPE
150°C (300°F)
Fragile, very fine hair
(Use lower temperatures for chemically treated hair)
170°C (340°F)
Thin, easy-to-straighten hair
(Use lower temperatures for chemically treated hair)
195°C (380°F)
Normal textured hair
(Use lower temperatures for chemically treated hair)
210°C (410°F) Wavy or curly hair
240°C (465°F) Coarse, very thick hair
3. Section dry hair evenly, and comb each section. Position the iron on the hair as far up as you
want hair to be straightened, being careful not to let the iron touch the scalp. Close the iron with
the hair between the two plates and gently pull the iron down to the end of the section of hair
you are straightening. Repeat this process several times, if necessary. Let the hair cool before
combing.
STYLING TIPS USING STRAIGHTENER
For short, spiky looks use gel or spray and hold the sections up and away from the head while
you straighten. For smoothing and taming curly hair, or creating a stylish, smooth bob, use the
straightener just on the ends, leaving the hair wavy at the roots for lift and body. For this type
of effect, keep the straightener moving while following the shape of your hairstyle. For looser
waves, close and lock the iron and use it as a wand. Wrap hair around the front housing and
hold for a few seconds to create a looser, free-flowing wave. For tighter curls, turn iron 180°
(top-down) and start close to the root or wherever you want the curl to start. Lightly hold hair
between plates and turn the iron as you move it down the strand. The slower the turn, the tighter
the curl. Adjust the angle to create different types of curls. For zig-zag styles, open the iron, wrap
hair around plates/ housing in a figure 8, hold for a few seconds and release. For flip and bend
waves, turn the iron as you reach the end of
hair strand – inward or outward – to create a
flip, bend or more body. For ideal results, use
finishing sprays after styling, if desired.
Unprecedented performance, design, and
versatility – the Prima3000
®
by BaBylissPRO
®
.
NANO TITANIUM™
Your Nano Titanium™ straightening iron has
man
y benefits. Titanium is an exceptional
conductor of heat and is stable in ultra-high
temperatures. The titanium plating technology
helps provide the ultimate heat performance
for beautiful, healthy-looking hair. Titanium’s
lightweight and smooth surface helps reduce
time and fatigue and is exceptionally resistant
to chemical corrosion. This Nano Titanium™
iron will give your hair a smooth, silky shine
while eliminating frizz.
GET TO KNOW YOUR PROFESSIONAL STRAIGHTENER
Model BABSS3000T
Silicone cool tips
Convex housing for
ultimate waves & curves
Locking function
IonMultiplier technology/
high-capacity ion generator
9-ft. industrial-strength swivel cord
On/Off switch & +/-
temperature adjustment*
LED temperature display
300°F– 465°F
Thumb rest & stand
HiDensity Dual Ceramic Heater System
Aircraft-grade titanium plates
SUS304 stainless steel corrosion & warp resistant
*Press and Release to Turn On. Press and Hold for a second to Turn Off.
Heat-resistant glove included
NOTICE
THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART TECHNOLOGY
ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS THAN ONE MINUTE.
DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT IF POWER
IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED.
TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.
FEDERAL COMMUNICATIONS
COMMISSION NOTICE
WARNING: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’
s authority to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) This device must
accept any interference received, including
interference that may cause undesired
operation.
NOTE: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
SUPPLIER’S DECLARATION
OF CONFORMITY
Brand: BaBylissPRO
®
Model No.: BABSS3000T
Description: Straightener
Responsible Party: Conair Corporation
1 Cummings Point Road
Stamford, CT 06902
(203) 351-9000
Standards: FCC Part 15 Subpart B, ANSI
C63.4-2014
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) This device must
accept any interference received, including
interference that may cause undesirable
operation.
DATE OF ISSUE: 08/08/2019
USER
MAINTENANCE
Your iron is virtually maintenance free. No
lubrication is needed. Keep all vents and
openings clear of dirt and dust. If cleaning
becomes necessary, disconnect the unit from
the power source, let it cool and wipe exterior
with a cloth. If any abnormal condition occurs,
unplug the unit, allow it to cool, and return it for
repair to an authorized service representative
only. No repairs should be attempted by the
consumer.
CAUTION
NEVER allow the power supply cord to be
pulled or twisted. Never wrap the cord around
the unit. Damage will occur at the high
flex point of entry into the unit, causing
it to rupture and short. Inspect the cord
frequently for damage. Stop use immediately
if damage is visible or if unit stops or operates
intermittently.
STORAGE
When not in use, your appliance is easy to
store. Allow unit to cool, then simply put back
in the box, and store out of reach of children in
a safe, dry location. Do not jerk or strain cord
at plug connections.
WARNING: IF YOU
THINK THE POWER
IS OFF WHEN THE
SWITCH IS OFF,
YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are
a dangerous combination, but did you know
that an electrical appliance is still electrically
live even if the switch is off? If the plug is in,
the power is on. So when you are not using
your appliances, keep them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES.
LIMITED FOUR-YEAR WARRANTY
BabylissPro will repair or replace (at our
option) your unit free of charge for 48 months
from the date of purchase if the appliance is
defective in any workman ship or materials.
To obtain service under this warranty,
return the defective product to the service
center listed below, together with your
purchase receipt and $5.00 for postage
and handling. California residents need only
provide proof of purchase and should call
1-800-326-6247 for shipping instruc tions.
In the absence of a purchase receipt, the
warranty period shall be 48 months from the
date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE 48-MONTH DURATION
OF THIS WRITTEN, LIMITED WARRANTY.
Some states do not allow limitations on how
long an implied warranty lasts, so the above
limitations may not apply to you.
IN NO EVENT SHALL BABYLISSPRO BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. Some states do
not allow the exclusion or limitation of special,
incidental, or consequential damages, so the
above limitation may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights, which
vary from state to state.
SERVICE CENTER
BabylissPro
Service Department
7475 North Glen Harbor Blvd.
Glendale, AZ 85307
©2019 Babyliss S.A.R.L.
15BA018853 IB-14186D
Loading ...
Loading ...
Loading ...
