Loading ...
Loading ...
Loading ...
The Problenl Solver
l_ emaker
Questions ?
Use this
problem solver, t
PROBI,EM POSSIBI,E CAUSE
ICEMAI_2R DOES NOT • Power cord is not l)lugged into a live outlet.
OPERATE • The control is set at OFF.
• The fllse is blown/circuit breaker is tripped. Replace fllse or
reset the breaker.
ICE CUBES HAVE
ODOR/TASTE
ICEMAKER IS ON, BUT
DOESN'T PRODUCE ICE
ICEMAKER IS ON, BUT
PRODUCES LITTLE OR
NO ICE
ICEMAKER PUMPS
CONTINUOUSLY, BUT
PRODUCES NO ICE
• High mineral content in the water supply: _,Vlter mav need to
be filtered or treated.
• Food items stored in ice bin. Do not store [llIV fi)O(1S in the
ice bin.
• Packaging materials were not removed. Make sure that all
packaging materials were removed at the time of installation.
• Ice storage bin needs cleaning.
• Scale has built up in the icemaker. If there is white scale
buildup in the icemaker's water or fl'eezing system, you should
clean the icemaker. See Care and Ch_anint{=-Icemaher 5)'slcm.
• The control is set at OFF.
• X,Vater supply is not connected.
• Condenser is dirty: Dirt or lint may be blocking the airflow
through the condenser. See C(,',_ and Cleanint{_-Con(len,_er
• Scale has built up in the icemaker. If there is white scale
buildup in the icemaker's water or freezing system, you should
clean the icemaker. See Care and Ch_anint{=-Icemaher @stem.
• Check tot a kink in the drain hose ti'om the ZPK1 Drain
Pump Kit to the house drain.
• Water sui)ply has been interrupted.
• Have a plmnber check for a clogged water wflve.
• Room temperatm'e is colder than normal. Room temperatm'e
m ust be above 55°F (13 °C). Otherwise, bin th era/osta t may
sense cold room mmi)eratm'e and shut off even though the bin
is not flfll of ice. Mso, unit may not restart once it does shut off.
• Condenser is dirty, Dirt or lint may be blocking tile airflow
through the condenser. See Care and Cleanint{_-Conden,se*:
• Scale has built up in the icemaker. If there is white scale
buildu I) in tile icemaker's water or fl'eezing system, you should
clean the icemaker. See Ca*_,and Ch,ani_N=-Icemaker @'stem.
• _,_ater is leaking from the water reservoir because the drain cap
is not secm'e. Make sure the drain cap is secm'ely tightened.
Relier to illustration in Can, and Cleani_N_lc(,mal_er 5)'slem section.
• UooIl/ teil/perattli'e is too hot. ROOII1 teilll)erattlYes of I/loI'e
than 90°F (32°C) will reduce ice production.
The ice sheet is trapped on the cutter grid. Uni)lug the
icemaker or disconnect power. Remove the cutter grid cover
and move the ice sheet to the cutter grid. Refer to illustration
in Feature,_ (?/your icemaker section. Reinstall the cutter grid
cover and reconnect power. Tm'n on the icemaker. The
icemaker will reset itself and start a new cvcle after flushing
water through the system, NOTE: Follow the directions in the
C(,',_ and Cleanint{_lgema/_er 5)'stem section to clean with the
Nickel Sate Ice Machine Cleaner.
14
Loading ...
Loading ...