Loading ...
Loading ...
Loading ...
4 1-800-732-2677
How the System Works
The PetSafe
®
Deluxe In-Ground Cat Fence
™
has been proven safe, comfortable, and effective for all cats over 6 lb. and at least
6 months old. The system works by producing a radio signal from the Fence Transmitter through up to 4000 ft. of Boundary
Wire. The Boundary Wire is buried or attached to a fi xed object to enclose the Pet Area. You temporarily defi ne this Pet Area
with Boundary Flags for a visual aid in training your cat. Your cat wears a Receiver Collar with Contact Points that touch his
neck and, once trained, is allowed to roam freely in the Pet Area. When your cat reaches the Warning Zone, the Receiver Collar
gives a warning beep. If your cat continues into the Static Correction Zone, a safe Static Correction will be delivered through
the Contact Points to get his attention until he returns to the Pet Area.
Key Definitions
Fence Transmitter: The device that transmits the radio signal through the Boundary Wire.
Pet Area: The area within the Warning Zone where your cat can roam freely.
Warning Zone: The outer edge of the Pet Area where your cat’s Receiver Collar begins to beep, warning him not to go into
the Static Correction Zone.
Static Correction Zone: The zone beyond the Warning Zone where your cat’s Receiver Collar will emit a Static
Correction, signaling him to return to the Pet Area.
Boundary Width: The combination of the Warning Zone and the Static Correction Zone.
Receiver Collar: The device that receives the radio signal from the Boundary Wire.
Correction Level Button: The button to adjust the level of Static Correction your cat receives in the Static Correction
Zone.
Receiver Indicator Light: The light that indicates the level of correction at which the Receiver Collar is set. This light also
serves as a low battery indicator.
Contact Points: The contacts through which the Receiver Collar delivers the safe Static Correction when your cat moves
into the Static Correction Zone.
Power Jack: The jack where the Power Adapter plugs into the Fence Transmitter. The Fence Transmitter is powered by a
standard 120-volt outlet.
Boundary Control Switch: The switch to adjust according to the length of Boundary Wire used.
Boundary Wire Terminals: The terminals where the Boundary Wires connect to the Fence Transmitter in order to
complete a continuous loop.
Loop Indicator Light: The light that indicates that the Boundary Wire makes a complete loop, enabling the signal to be
transmitted.
Boundary Width Control: The knob that adjusts the width of the Warning and Static Correction Zones. Note: Adjusting the
knob does not change the level of Static Correction on the Receiver Collar.
Pet Area
Static Correction
Zone
Static Correction
Zone
Fence
Transmitter
Warning
Zone
Warning
Zone
Boundary
Width
Contact
Points
Battery Module
Receiver
Indicator
Light
(Top)
(Bottom)
Correction
Level Button
Receiver Collar
}
Boundary Width
Control
Power Light
Loop Indicator Light
Boundary Wire
Terminals
Ground
Terminal
Boundary
Control
Switch
Power
Jack
Fence Transmitter
Loading ...
Loading ...
Loading ...