Loading ...
Loading ...
Loading ...
l The touch buttons on the display screen may not operate
correctly if condensation forms inside them. If this happens,
do not attempt to operate the switches until the condensation
has disappeared.
l If juice or similar liquid is spilled on the display, wipe
o󰀨 immediately. Failure to do so may result in product
malfunction.
l The screen is easily marked by îš¿ngerprints and tends to
attract dust, and should therefore be cleaned occasionally.
When cleaning, turn o󰀨 the power, and wipe lightly with a soft,
dry cloth. To remove dirt, soak a soft cloth in neutral detergent
and squeeze well before wiping. Do not use a wet oor-cloth,
organic solvents (benzene, ethanol, thinner, etc.), acids, or
alkalis. Using such agents will result in screen deterioration.
Furthermore, do not hit the screen or rub it with hard objects.
NOTE
l SUBARU CORPORATION is not responsible for any damages
to the purchaser or third parties that occur from using the map
data.
l We do not provide any replacements or refunds for any mistakes
there may be in the map data displays or contents, such as
misspelling, omissions or misaligned positions.
l SUBARU CORPORATION makes no guarantee that the
functions included in the map data will be appropriate for the
speciîš¿c objectives of the purchaser.
l Functions that cannot be operated while driving have their colors
toned down when the vehicle is being driven, and their operation
is disabled. Touching a disabled switch may result in the display
of an operation prohibited message on the screen.
l When using the unit for the îš¿rst time after purchase, or after
the battery was removed for a long time, the current position
may not be displayed correctly. Wait a short time until the GPS
positioning corrects the displayed position.
l This device is precision-engineered equipment and the recorded
data can be lost as a result of static electricity, electrical noise,
vibration, or other inuences. To protect the device against data
loss, we recommend keeping a separate record of the data that
you record after purchase.
l The screen may be adversely a󰀨ected or disturbed by noise if
electrical equipment that generates powerful electrical noise
is used near the system. In such cases, keep the electrical
equipment at a distance, or refrain from use.
l The display may appear brighter when the temperature is low,
or immediately after starting the engine, however, this is a
characteristic of the LED elements, and does not indicate a fault.
The display will return to its original brightness when the vehicle
cabin has warmed up.
INTRODUCTION
8
Loading ...
Loading ...
Loading ...