Loading ...
Loading ...
Loading ...
16
OPERATION
This Lithium-ion battery pack is equipped with an internal circuit breaker which will automatically
shut off the power to the tool and then reset itself once cooled.
Follow these steps if an overload occurs while under heavy use:
1. Release the power switch and restart tool by depressing switch.
2. The battery may need to be removed for approximately 1 minute, allowed to cool and then
reinstalled for use.
IMPORTANT
STARTING AND STOPPING (See Figure 5)
TO START THE MOTOR:
• Fit the battery pack into the polesaw.
• Press and hold the
trigger lock. This makes the trigger operational.
• Press and hold the trigger, release the trigger lock and continue to squeeze the trigger for
continued operation.
TO STOP THE MOTOR:
• Release the trigger.
Trigger
Trigger Lock
Fig.5
Loading ...
Loading ...
Loading ...