Loading ...
Loading ...
Loading ...
12
ASSEMBLY
CONNECTING THE POLES (See Figure 2)
Before using the polesaw, assembly is required. When removed from the box, there are the
three poles as shown below.
• Remove packaging material from cord and discard (1).
• Insert the extension pole into the handle pole and slide together. The tubes are oval-shaped and
will only install one way.
• Push to the threaded base on the handle pole the lock sleeve into the extension pole and the
press button will lock into the press button hole (2).
Then use a wrench to secure the lock nut (3).
• Repeat this process to attach the extension pole to the handle pole.
WARNING
Do not allow familiarity with this product to make you careless. Remember that a careless fraction
of a second is sufcient to inict serious injury.
WARNING
Always wear safety goggles or safety glasses with side shields when operating power tools. Failure
to do so could result in objects being thrown into your eyes, resulting in possible serious injury
.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
Fig. 2
NOTE
: For convenient assembly, the extension pole must be connected with powerhead pole rst,
and then connected with the handle pole.
Step 1
Handle Pole
Powerhead Pole
Lock Sleeve
Extension Pole
Loading ...
Loading ...
Loading ...