Sony SRSXG300/HZ SRS-XG300 X-Series Wireless Portable-Bluetooth Party-Speaker IP67 Waterproof and Dustproof with 25 Hour-Battery and Retractable Handle, Light Gray- New

User Manual - Page 9

For SRSXG300/HZ.

PDF File Manual, 103 pages, Read Online | Download pdf file

SRSXG300/HZ photo
Loading ...
Loading ...
Loading ...
Help Guide
Wireless Speaker
SRS-XG300
Charging the speaker
The speaker is capable of running on power either from an AC outlet connected by the supplied AC adaptor or from the
rechargeable built-in lithium-ion battery.
When using the speaker for the first time, be sure to charge the built-in battery for more than 1 hour before turning on the
speaker.
With the built-in battery charged in advance, you can use the speaker solely with battery power.
Hint
For charging the built-in battery of the speaker, the Battery Care mode option is available in addition to the normal charging
method. Battery Care mode limits the maximum charge capacity to approximately 90% and makes the battery life last longer. The
playback time available in Battery Care mode is shorter than the time available when the built-in battery is charged by the normal
charging method. At the time of purchase, the speaker is not in Battery Care mode.
While the speaker is turned on, pressing and holding the BATTERY button/
BATTERY CARE button behind the cap on the
rear side of the speaker for about 2 seconds places the speaker into Battery Care mode and you hear voice guidance (Battery
Care mode, ON) from the speaker. Pressing and holding the BATTERY button/
BATTERY CARE button once again for about
2 seconds brings the speaker out of Battery Care mode and you hear voice guidance (Battery Care mode, OFF) from the
speaker.
You can place/bring the speaker into/out of Battery Care mode with “Sony | Music Center” as well.
Checking the charging completion
If the built-in battery is fully charged when you connect the speaker to an AC outlet, the CHARGE indicator lights up in
orange then turns off after about 1 minute.
Connect the speaker to an AC outlet to charge it.
Connect the DC IN 5 V port on the speaker and an AC outlet with the supplied AC adaptor.
Battery charging starts and the CHARGE indicator lights up in orange. Charging will complete in about 5 hours
*
and
the indicator will turn off.
After you disconnect the AC adaptor from the speaker upon completion of battery charging, be sure to close the
cap securely.
The cap plays a very important role in maintenance of the waterproof and dustproof performance.
1
Time that is required to charge the empty built-in battery to its full capacity while the speaker is turned off.
*
9
Loading ...
Loading ...
Loading ...