Loading ...
Loading ...
Loading ...
The passkey of the speaker is “0000.” If a passkey besides “0000” is set on the BLUETOOTH device, pairing cannot be done with
the speaker.
Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
The speaker is already paired with 8 devices and another device is to be paired.
The speaker can be paired with up to 8 devices. When a new device is paired in addition to 8 paired devices, the pairing
information of the earliest device connected via a BLUETOOTH connection is replaced by the information of the new one.
The pairing information of the speaker has been deleted from the BLUETOOTH device.
The speaker is initialized.
All pairing information will be deleted. If you initialize the speaker, it may not be able to connect your BLUETOOTH device. In
this case, erase the pairing information of the speaker on your BLUETOOTH device, and then perform the pairing procedure
again.
When an audio cable is connected to the speaker’s AUDIO IN jack while the speaker and the BLUETOOTH device have been
connected via BLUETOOTH connection, sound from the BLUETOOTH device is not output from the speaker (the hands-free
function is available). To listen to music from the BLUETOOTH device, disconnect the audio cable from the speaker’s AUDIO IN
jack.
The speaker can be paired with multiple devices, but can only play music from one paired device at a time.
When using the Stereo Pair function or the Party Connect function, you cannot use the multipoint connection capability.
Related Topic
Connecting the speaker concurrently with 2 BLUETOOTH devices (multipoint connection)
Listening to music of a device via BLUETOOTH connection
Terminating the BLUETOOTH connection (After use)
5-039-104-11(1)
Copyright 2022 Sony Corporation
26
Loading ...
Loading ...
Loading ...