Loading ...
2-010ECOINSERT-E-01
CLEANING INSTRUCTIONS
We recommend to thoroughly clean your device prior to first
use and in between filter changes. Hand Wash entire pitcher,
cap, reservoir and rear lid with a mild dish soap. Do not wash
in the dish washer. Rinse well and hand dry.
TROUBLESHOOTING
TRY THESE TIPS…
• Review the inside of the filter to ensure there is no damage
to the filter itself which may prevent it from sealing 100%.
• To achieve maximum performance and ensure a tight seal,
make sure the filter is seated properly inside the
reservoir chamber.
• Check to make sure the cap inside the reservoir is aligned
properly and the ¼ turn lock is engaged.
• Check for cracks in the reservoir or damage to your filter.
Please contact customer service for additional instructions.
• Store device in the refrigerator or out of direct sunlight.
For all other issues, please contact our customer service center at
1-800-503-2939 or email customerservice@zerowater.com
4
INSERT FILTER
using the center rod as a
guide. Ensure filter is seated properly at the
bottom of the reservoir.
5 REPLACE CAP by aligning it on the center rod
and turning it ¼ turn clockwise to lock
Note: the filter is pressure fit (from top to bottom)
so you may have to push the cap down a bit prior
to engaging the lock.
6 FILL RESERVOIR with cold tap water.
7 DISCARD your first two pitchers of filtered
water to flush the system.
8 FILL PITCHER and dispense your filtered
water as necessary.
Note: Replace filter after 120 gallons of filtration.
4
5
6
8
1
REMOVE FILTER from filter bag and
rinse in cold tap water for 15 seconds to
remove any surface carbon. Set filter aside.
2
REMOVE LID THEN REMOVE
CAP inside the reservoir by turning it
¼ turn counterclockwise and pulling it
up and out to remove.
3
THOROUGHLY HAND WASH
entire pitcher, cap, reservoir and rear lid
with a mild dish soap. Do not wash in the
dish washer. Rinse well and hand dry.
ECOFILTER ASSEMBLY
INSTRUCTIONS
1
2A
2B
LIMITATION OF LIABILITY
CLIENT APPROVAL
Please review this for accuracy
and contact Smith Design with any
amendments and/or your approval
by phone or email. Following
approval, Smith Design is not
liable for any loss or damage
due to incorrect information.
PRODUCTION NOTES:
-
20129
ZERO WATER
EcoFilter Wrap Die Update
P02_ZW_EcoFilter_Wrap_INSIDE.ai
AM: JG
AD: MH
ARTIST: BG
RT/ILL: ME
8 Budd Street, Morristown, NJ 07960
973 429 2177 | smithdesign.com
02.02.21
COLORS ARE APPROXIMATE ONLY.
Supplied fonts are for the
exclusive print production use ONLY.
Client MUST purchase all fonts per
font licensing agreements.
BLACK
THIS IS NOT A FINAL MECHANICAL
2