Loading ...
Loading ...
Loading ...
EN-26
1.
Press P (Power) to turn on Digital Keyboard power.
“Casiotone” is displayed while startup is in progress.
• Your Digital Keyboard is ready to use when the home screen appears on the display after
startup is complete.
• Depending on the usage status of samples and other data, it may take some time for the Digital
Keyboard to become ready for use.
2.
To turn off power, long-press P (Power) until the display goes blank.
• Turning off power normally causes the tone and rhythm number and other settings to return
to their initial defaults. However, the settings below are remembered.
– PEDAL2 pedal type
– PEDAL2 calibration
– Sampled melody tone (type, loop note value and repeats)
– Sampled drum tone (note off, type, loop note value and repeats)
– MY SETUP power on recall
– Wireless setting
– MIDI OUT Channel (Upper1, Upper2, Lower)
– MIDI Sync Mode
– Auto Power Off
– Battery type
– Display contrast
– Button long-press time
• Pressing the P (Power) to turn off power actually puts the Digital Keyboard into a standby state.
Minute amounts of current continue to flow within the Digital Keyboard in the standby state. If you do
not plan to use the Digital Keyboard for a long time or if there is a lightning storm in your area, be
sure to unplug the AC adaptor from the power outlet.
• You can configure Digital Keyboard settings so MY SETUP settings are recalled whenever power is
turned on. See “Enabling MY SETUP Power On Recall” (page EN-110).
• Do not touch the PITCH BEND wheel when turning on power.
Playing on the Keyboard
Turning Power On or Off
B
Loading ...
Loading ...
Loading ...