Loading ...
Loading ...
Loading ...
Connecting with External Devices
EN-235
● To connect an external device to the LINE OUT jack
You can use a commercially available connecting cable for connection.
• When connected with an audio device (Figure
)
LINE OUT R (right) is the right channel and LINE OUT L/MONO (left) is the left channel.
Use a commercially available connection cable for connection as shown in Figure
. Normally,
you should set the input selector of the audio equipment to the jack where the Digital Keyboard is
connected (AUX IN, etc.)
• When connected with a music amplifier (Figure
)
Connecting to the LINE OUT L/MONO jack only outputs a mixture of both channels. Use a
commercially available connection cable as shown in Figure
.
■ Speaker Audio Output
If you want to disable sound output from the Digital Keyboard speaker while using the LINE OUT jack,
use the procedure under “Configuring Settings” (page EN-196) to change the “Speaker” setting to “Off”.
Use the procedure under “Configuring Settings” (page EN-196) to change the “Speaker enabled when
PHONES connected” setting to “On”.
• If “Off” is selected for the “Speaker” setting, nothing will be output from the speaker of the Digital
Keyboard even if “On” is selected for the “Speaker enabled when PHONES connected” setting.
• Selecting “Off” for the “Speaker” setting turns off the surround function.
INPUT 1
INPUT 2
Guitar amplifier
Keyboard amplifier, etc.
RIGHT (Red)
LEFT (White)
Pin plugs
Audio amplifier AUX IN jacks, etc.
Standard plug (6.3mm)
LINE OUT L/MONO jacks
(Standard jack (6.3mm))
LINE OUT R jacks
(Standard jack (6.3mm))
B
Loading ...
Loading ...
Loading ...