Loading ...
Loading ...
Loading ...
You should descale your coffee maker every 3-6 months.
Properly follow the descaling procedure.
Depending on the mineral content of your water, calcium
deposits or scale may build up in your coffee maker. Scale
is non-toxic but if left unattended can hinder coffee maker
performance. Regularly descaling your coffee maker every
3-6 months helps maintain the heating element, and other
internal parts that come in contact with water. Calcium
deposits may build up faster, making it necessary to descale
more often.
Descaling Procedure
Before you begin, you will need a large ceramic mug, fresh
water, Keurig® Descaling Solution, and access to a sink.
Do not use a paper cup. Ensure that there is no beverage
pod in the K-Cup® pod holder. Please allow approximately
35minutes for the descaling procedure.
STEP 1: Descaling Solution Rinse
Press the power button to power the coffee maker off.
Pour the entire bottle of Keurig® Descaling Solution into
an emptied water reservoir. Then fill the empty bottle with
water and pour into the water reservoir. Press the power
button to turn the coffee maker back on.
Place a large mug on the drip tray and run a rinsing brew by lifting
and lowering the handle and selecting the largest brew size.
STEP 2: Descaling Rinse & Repeat
Repeat the rinsing brew process until the add water light
is illuminated. Do not use a K-Cup® pod. Let coffee maker
stand for at least 30 minutes while still on.
After 30 minutes, discard any residual solution from the
water reservoir and rinse thoroughly.
STEP 3: Fresh Water Rinse
Fill the water reservoir with fresh water to and not beyond
the MAX line.
Place a large mug on the drip tray plate and run a rinsing
brew using the largest brew size. Do not use a K-Cup® pod.
Pour the contents of the mug into the sink.
Repeat brew process until you have completed at least
12rinsing brews using the largest brew size. You may need to
refill the water reservoir at least one time during this process.
NOTE: The cleaning action of Keurig® Descaling Solution may result in a “foam” dispensed from the coffee
maker. This is natural, as the solution is reacting with the scale inside. For a coffee maker that is heavily scaled,
the coffee maker may not fill properly after the descaler is added. If this occurs, you may see only a small or no
output dispensed, followed by the sound of air blowing out. If this occurs:
• Turn off and unplug the coffee maker.
• If there is Keurig® Descaling Solution in the water reservoir, discard the contents, rinse the water reservoir
thoroughly and refill with water.
• Plug the coffee maker back in, power on, and repeat the Step 3 Fresh Water Rinse cycle. The coffee maker
should begin to function normally as the solution is rinsed out and the scale is removed. If problem persists,
allow coffee maker to sit unplugged for at least 30 minutes before continuing with the rinse.
Descaling your Coffee Maker
Loading ...
Loading ...
Loading ...