Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 8991477A554/B
e
End of Pyrolytic function
At the end, is displayed and flashes
and a beep is activated.
1. Press the touch button on the control
panel to exit the function.
2. Open the door and collect the residue
deposited inside the oven cavity with a
damp microfibre cloth.
It is not possible to select any function once the
door lock device has been activated. It is still
possible to switch off the appliance:
1. Press the button for a few seconds on
the display.
2. When the control panel is reactivated, press
the touch button to end the function.
Programmed pyrolytic function
It is possible to program the Pyrolytic cycle start
time like all other cooking functions.
1. After selecting the Pyrolytic function, press
button.
The and indicator lights on the display
flashes.
2. Press the and touch buttons on
the control panel to set the function end time.
3. Press the button to confirm.
The appliance waits until the set start time to start
the Pyrolytic function.
Descaling
Periodically the display will prompt you to
perform the boiler descaling procedure.
Preliminary operations
1. Open the door.
2. Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
During the Pyrolytic cycle the fans
produce a more intense level of noise
due to a greater rotation speed. This is
an absolutely normal operation,
intended to provide more effective heat
dispersal. At the end of the pyrolytic
cycle, the fans will continue to operate
for long enough to avoid overheating
the walls of adjacent units and the front
of the oven.
During the first Pyrolytic cycle,
unpleasant odours may occur due to
the normal evaporation of oily
manufacturing substances. This is an
absolutely normal phenomenon which
disappears after the first pyrolytic cycle.
If the pyrolytic cycle gives unsatisfactory
results at minimum duration, it is
recommended to set a longer time for
subsequent cleaning cycles.
We recommend wearing rubber gloves
for these operations.
For easier manual cleaning of parts that
are difficult to reach, we recommend
removing the door.
The presence of scale due to lack of
descaling can compromise correct
operation of the appliance in the long
term.
Descaling is a long process (more than
one hour) that requires the user to be
present in front of the appliance.
We recommend performing descaling
every time this is indicated on the
display in order to keep the boiler in
perfect operating condition.
The descaling process can be
cancelled 2 consecutive times by
pressing the button on the display.
After this, the appliance will not allow
you to run any other function until the
descaling process is performed.
Loading ...
Loading ...
Loading ...