Loading ...
Loading ...
Loading ...
82 - USE 91477A554/B
Water hardness
1. After entering the setting menu, press the
and touch buttons on the control
panel until the water hardness function is
selected.
2. Press the and touch buttons on
the control panel to set water hardness
(values from 1 to 5) (for example "1").
3. Press the button to confirm.
Depending on the degree of water hardness
(°dH or °dF), the number of hours after which
descaling is required is as follows:
Keep warm
1. After entering the setting menu, press the
and touch buttons on the control
panel until the Keep warm function is
selected.
2. Press the and touch buttons on
the control panel to start the Keep warm
function.
3. Press the button to confirm.
This mode allows you to set the water
hardness value in order to optimise the
descaling process.
The appliance is factory set for water of
medium hardness (3).
If your mains water supply is too hard,
we recommend using a water softener.
Request information on the hardness of
your water from your local water board.
Value °dH °dF Hours
1 0 - 8 0 - 15 50
2 8 - 14 15 - 25 45
3 14 - 21 25 - 38 35
4 21 - 38 38 - 53 25
5 31 - 50 54 - 90 10
This mode allows the appliance
after cooking finishes with a cooking
cycle for which a duration has been set
(if this is not manually interrupted), to
keep cooked food warm (at low
temperatures) without altering the taste
and aromas obtained during cooking.
To use the appliance normally, set this
function to OFF.
Loading ...
Loading ...
Loading ...