Loading ...
Loading ...
Loading ...
English
English 43
Cleaning the mesh filter
Clean the mesh filters in the water inlets once or twice a year.
1. Turn off the washer, and then unplug the power cord.
2. Close the water taps.
3. Loosen and disconnect the water hoses from the
back of the washer. Cover the end of each hose with a
cloth or towel to prevent water from gushing out.
4. Use pliers to pull out the mesh filter from the inlet
valves.
5. Thoroughly clean the mesh filters in water.
6. Completely dry the mesh filters. Do not dry in direct
sunlight.
7. Reinsert the mesh filters, and then reconnect the
water hoses.
8. Open the water taps.
NOTE
If a mesh filter is clogged, the “4C” information code appears on the washer’s display screen.
Untitled-36 43 2022-12-21 4:48:24
Loading ...
Loading ...
Loading ...