Loading ...
Loading ...
Loading ...
17
4. Operation
4.7 LCD Settings
There are three parameters to set up the UPS. Refer to the illustration below.
Parameter 1 is for program alternatives. Refer to below tables for the programs to set up.
Parameter 2 and Parameter 3 are the setting options or values for each program.
Note: Use the “Up” or “Down” button to change the programs or parameters.
Programs Available for Parameter 1:
Code Description
Bypass /
Standby Mode AC Mode
ECO
Mode
Freq.
Converter
Mode
Battery
Mode
Battery
Test
01
Output voltage
02
Output frequency
03
Voltage range for bypass
04
Frequency range for bypass
05
ECO Mode enable/disable
06
Voltage range for ECO Mode
07
Frequency range for ECO Mode
08
Bypass Mode setting
09
Maximum battery discharge time setting
10
Reserved Reserved for future options
11
Reserved Reserved for future options
12
Neutral loss detection
13
Battery voltage calibration
14
Charger voltage adjustment
15
Inverter A voltage adjustment
16
Inverter B voltage adjustment
17
Inverter C voltage adjustment
18
Output A voltage calibration
19
Output B voltage calibration
20
Output C voltage calibration
A in chart indicates the program can be set in the mode listed.
Note: All parameter settings will be saved only when the UPS shuts down normally with internal or external battery connection. (Normal UPS shutdown
means turning off input breaker in Bypass/Standby Mode).
Loading ...
Loading ...
Loading ...