Loading ...
Loading ...
Loading ...
6 49-2000492 Rev. 2
Wi-Fi
Heat Sensor
Screen Moisture Protection System
Connecting your Wi-Fi Connect Enabled Appliance
Your GE Appliances Kitchen Hub™ is recommended to be connected to Wi-Fi.
Use the Setup Wizard to connect unit to Wi-Fi.
This unit is equipped with a heat sensor that will
activate the ventilation FAN if excessive temperatures
are detected above the cooktop surface to protect the
Kitchen Hub™ components from overheating.
If FAN is OFF and excessive temperature is detected,
the FAN will automatically turn to MEDIUM speed. You
may adjust FAN speed to HIGH or BOOST, but you will
not be able to turn to OFF until temperatures return to an
acceptable level.
Your Kitchen Hub™ is equipped with a screen protection
system. The system expels small amounts of air around
and below the screen to keep the touchscreen area
dry and clean by preventing condensation or other
substances during cooktop operation.
The system is on while the screen is in the awake
state and off when the screen is in screensaver mode
or off position. Operating the cooktop while screen
protection system is off may result in condensation on the
touchscreen. It is recommended to activate screen during
cooking to prevent this from happening. If condensation
build up continues while protection system is active, turn
the ventilation FAN on to provide additional protection.
USING THE KITCHEN HUB™: Wi-Fi / Heat Sensor / Screen Moisture Protection System
Loading ...
Loading ...
Loading ...