Loading ...
Loading ...
Loading ...
en operation
30
13.8 Starting the programme
Requirement:A programme is set.
→"Setting a programme", Page28
▶ Press Start / Reload.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: End.
13.9 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→"Setting a programme", Page28
¡ The programme end time is set
and activated.
→"Buttons", Page22
1. Press Start / Reload.
The activated programme end time
is paused.
2. Press Finish in until the display
shows the required programme
end time.
3. Press Start / Reload.
The changed programme end time
is activated.
13.10 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
1. Press Start / Reload.
The appliance pauses.
Note:If you want to add laundry,
follow the instructions on the dis-
play.
→"Display", Page21
2. Open the door.
3. Add or remove laundry.
4. Close the door.
5. Press Start / Reload.
13.11 Cancelling the pro-
gramme
1. Press Start / Reload.
2. Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→"Programmes", Page23
3. Remove the laundry.
→"Unloading the laundry",
Page31
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→"Buttons", Page22
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
1. Set the Spin programme or a pro-
gramme for draining the water.
→"Programmes", Page23
2. Press Start / Reload.
Loading ...
Loading ...
Loading ...