Loading ...
Loading ...
Loading ...
7
1 -
EN
1 -1 -
3 - PROGRAMMING
(continued)
3.2 - PROGRAMMING A WASH CYCLE
(continued)
ADDING OR REMOVING AN ITEM DURING THE
CYCLE
(impossible during spin)
Press and hold the "Start/Pause" button to inter-
rupt the programme.
The time remaining flashes and the door lock indica-
tor goes out.
Insert or remove the linen.
The time taken to unlock the door depends
on the temperature inside the machine and
can last up to several minutes for safety reasons.
Press "Start/Pause" to restart the programme
The countdown resumes.
Nota : If you have selected a delayed start, you can
open the drum at any time before the wash pro-
gramme starts.
CANCELLING A PROGRAMME
Press and hold the "On/Off" button .
All the lights go out.
This operation may be made at any time, during the
cycle or when programming or even when paused.
Nota : In all cases, cancelling a programme means
that you have to re-programme everything from the
start again
(see paragraph 3.2)
.
2
2
1
12
END OF THE WASHING CYCLE
The display shows "Stop"
(Diagram 3.2.1)
and the
door lock indicator goes out.
You can programme a new cycle without having to
press the "On/Off" key .
This display is automatically switched off after a
maximum of 5 minutes in order to save energy in
standby mode.
Open the lid and remove the linen.
Some models automatically position the drum with
the opening at the top to make it easier to take the
linen out. This operation only lasts 3 minutes at
most.
Press and hold the "On/Off" button to switch off
the washing machine.
CHILD SAFETY
Activate "Child safety" to lock your programme by
pressing the first and second options buttons at the
same time. Once this safety device is active,
light , corresponding to the ( ) symbol
,comes on.
Simultaneously press the same buttons again to
switch off the "Child safety" function.
1
11
12
1
Information :
In the event of a power cut, the cycle will automati-
cally restart from the point where it stopped, as
soon as the power returns.
Loading ...
Loading ...
Loading ...