Loading ...
Loading ...
Loading ...
Diese1Gen GenEn ON
TimeCtr1Em ON
TimeDelay 0S
StarSoc 20.0%
EndSoc 80.0%
TimOn1 00:00
TimOff1 00:00
TimOn2 00:00
TimOff2 00:00
TimOn3 00:00
TimOff3 00:00
Note:
Diesel generator enable and time control enabled
must be on, other wise the diesel generator
an not be started.
1. Diese1Gen GenEn — Diesel generator enable.
2. TimeCtr1Em — Time control enable.
3. TimeDelay — Delay time of diesel generator
start working.
4. StarSoc — Battery power percentage when
diesel generator start charging the battery.
5. EndSoc — Battery power percentage when
diesel generator stop charging the battery.
6. TimOn1 — Diesel generator start time 1.
7. TimOff1 — Diesel generator off time 2.
Power ON/OFF
Please check the following requirements before testing:
• Installation location is suitable according to "Mounting Location"
• All electrical wires are connected tightly, including PV modules, battery and AC
side(Such as the grid side, EPS side, Gen side).
• Earth line and Smart meter/CT line are connected.
• AF-DF hybrid inverters should be set according to the required local grid standard.
• More information please contact with VTAC or distributors.
Power ON
• Turn on DC switch.
• After LCD lighting, hybrid inverter should be set following "Time & Date" at the first
time.
• When inverter running under normal mode, Running indicator will light up
Power OFF
• Turn off DC switch (in hybrid inverter) and all extra-breaker.
Restart
Restart Hybrid inverter, please follow steps as below:
• Shutdown the inverter
• Start the inverter
Maintenance & Trouble Shooting
Maintenance
Periodically maintenance are necessary, please follow steps as below.
• PV connection: twice a year
• AC connection(Grid and EPS) : twice a year
• Battery connection: twice a year
• Earth connection: twice a year
• Heat sink: clean with dry towel once a year
Trouble Shooting
The fault messages are displayed when fault occurs, please check trouble shooting
table and find related solutions.
Loading ...
Loading ...
Loading ...