Loading ...
WARNING
1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
1. All work on the inverter must be carried out by qualified electricians.
2. The PV panels and inverter must be connected to the ground.
3. Do not touch the inverter cover until 5 minutes after disconnecting both DC and AC
power supply.
4. Do not touch the inverter enclosure when operating, keep away from materials that may
be affected by high temperatures.
5. Please ensure that the used device and any relevant accessories are disposed of in
accordance with applicable regulations.
6. VTAC inverter should be placed upwards and handled with care in delivery. Pay attention
to waterproof. Do not expose the inverter directly to water, rain, snow or spray.
7. Alternative uses, modifications to the inverter not recommended. The warranty can
become void if the inverter was tampered with or if the installation is not in accordance
with the relevant installation instructions.
EXPLANATION OF SYMBOL
20
PAP
Symbol Explanation
CE mark.
The inverter complies with the requirements of the applicable CE
guildlines.
Beware of hot surface
The inverter’s housing may reach uncomfortably hot 60°C (140°F)
under high power operation. Do not touch the inverter enclosure when
operation.
Danger of high voltages. Danger to life due to high voltages in the
inverter!
Refer to manual before service
Do not dispose of this device with the normal domestic waste.
Important notes
Read all instructions carefully. Failure to follow these instructions,
warnings and precautions may lead to device malfunction or
damage.
Residual power discharge
Do not open the inverter cover until 5 minutes after disconnection
both DC and AC power supply.
Loading ...
Loading ...
Loading ...