1. Confirm that the power switch on the
inflator is in the “O” (OFF) position.
2. Remove valve cap from stem.
3. Attach the universal adapter from the
inflator to the valve stem with the lever in
the up position. Be sure to press
universal adapter down over valve stem
threads completely. When universal
adapter is firmly in place, press locking
lever down to lock onto valve stem.
4.
Plug power cord into 12V DC power outlet.
WARNING For use with any 12V DC
power outlet rated 15-Amps or higher. Do
NOT use with older 8-Amp cigarette
lighter receptacles.
5. Turn inflator power switch to “I” (ON)
position and inflate to the manufacturer’s
recommended air pressure.
6. Once desired pressure is reached, turn
power switch to the “O” (OFF) position.
7. Unplug the power cord from 12V DC
power outlet.
8. Remove the universal connector from
the tire valve.
When inflating truck or trailer tires
requiring pressure greater than 50 psi, it
is recommended that the tire is deflated
manually to 40 psi or less before
beginning inflation. This operation allows
the inflator to gradually reach the desired
pressure and prevents the inflator’s pump
from stalling.
WARNING Read and understand all
instructions before use. Failure to follow
instructions can result in personal injury
and/or property damage. Save these
instructions for future reference.
WARNING
•KEEP OUT OF THE REACH OF
CHILDREN. The inflator is not a toy and
is not intended for use by children.
•USE12VOLTDCpoweronly.Make
sure that your vehicle’s 12 Volt power
outlet is free of any ash residue or debris.
A dirty 12 Volt power outlet can cause the
inflator and power cord to overheat.
Overheating can cause damage to your
inflator/vehicle and could cause bodily
harm or injury.
•Forusewithany12VDCpoweroutlet
rated 15 Amps or higher. Do NOT use
with older 8 Amp cigarette lighter
receptacles.
•Thisinflatorisdesignedtoinflatecar
tires, bike tires, ATV tires, sports
equipment, air mattresses, beach toys
and other inflatables. DO NOT USE FOR
ANY PURPOSE OTHER THAN
INFLATING.BODILYHARMOR
PERSONAL INJURY CAN OCCUR.
•NEVERexceedthemanufacturer’s
recommended pressure for any inflatable
object. DO NOT OVER-INFLATE
OBJECTS. Over inflation can cause
personal injury and/or property damage.
CAUTION
•HOT-Donotholdinhandwhile
operating. Place compressor on ground
during use.
•DONOTruncompressorformorethan
10 minutes continuously.
•ALLOWTHECOMPRESSORTO
COOLATLEAST10MINUTESAFTER
EACH10MINUTESOFCONTINUOUS
USE.
•NEVERuseintrafficorotherunsafe
areas.
•NEVERleavetheinflatorrunning
unattended.
•DONOTcarrytheinflatorbytheair
hose or power cord as damage may
occur.
•Disconnectpowerwhennotinuse.
•Donotoperateinflatornearflammable
liquidsoringaseousorexplosive
atmospheres. Internal sparks may ignite
fumes.
•Donotoperateorstoreyourinflatorina
damp or wet locations.
12V Mini Tire Inflator
OPERATOR’S MANUAL
Model No. 60400
Your tire inflator has been engineered and manufactured for dependability,
ease of operation, and operator safety. When properly cared for, it will give
you years of trouble-free performance.
WARNING
Please read and save these instructions. Read carefully before attempting
to assemble, install, operate or maintain the product described. Protect
yourself and others by observing all safety information. Failure to comply
with instructions could result in personal injury and/or property damage!
Retain this manual for future reference.
For assistance with this product call 800-426-1262 between 7 a.m. and 4 p.m. Pacific time.
DANGER
Danger indicates an
imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING Warning indicates a
potentially hazardous situation which, if
not avoided, could result in death or
serious injury.
CAUTION Caution indicates a
potentially hazardous situation which, if
notavoided,MAYresultinminoror
moderate injury.
NOTICE Notice indicates
important information, that if not followed,
may cause damage to equipment.
FEATURES
•Keepinflatordry,clean,andfreefrom
oil and grease. Always use a clean cloth
when cleaning. Never use brake fluids,
gasoline, petroleum-based products, or
any strong solvent to clean the inflator.
•Operatetheinflatoronlywiththe
attachments that are included.
•USESAFETYGLASSES.Alsouseface
or dust mask if operation is dusty.
•Yourvehicle’s12Voltbatterymustbe
fully charged to get the best performance
from your inflator. If your vehicle’s battery
is weak, the inflator will not work at its
maximumoutputlevel.
•Forbestresults,itisrecommendedthat
you operate your inflator with your
vehicle’s engine running.
WARNING: DO NOT RUN VEHICLE
ENGINE INSIDE A CONFINED AREA
SUCH AS A GARAGE as bodily injury or
asphyxiationresultingindeathcanoccur.
ALWAYS ALLOW FOR PROPER
VENTILATION.
•Mostvehicle12Voltpoweroutletswill
operate with vehicle ignition off; however,
some vehicles require that the ignition be
turned on.
•THISINFLATORISNOTDESIGNED
TO FILL AIR TANKS OR AIR SHOCKS.
1. Confirm that the power switch on the
inflator is in the “O” (OFF) position.
2. To use the inflation accessories, snap
either piece into the universal adapter
and push the lever to lock into place. The
inflation accessory will fit securely.
3. Plug power cord into 12V DC power
outlet.
WARNING For use with any 12V DC
power outlet rated 15-Amps or higher. Do
NOT use with older 8-Amp cigarette
lighter receptacles.
4. Insert the appropriate inflation
accessory into the inflatable object (tire,
football, raft, etc.).
5. Turn inflator power switch to “I” (ON)
position and inflate to the manufacturer’s
recommended air pressure.
6. When the object is firm, turn power
switch to the “O” (OFF) position. DO NOT
OVER INFLATE OBJECTS.
7. Unplug the power cord from 12V DC
power outlet.
OPERATING INSTRUCTIONS - TIRES
P.O.Box88259Tukwila,WA98138•©2010WilmarCorporation
Allrightsreserved•airTIGHT™isatrademarkofWilmarCorporation
SAFETY GUIDELINES / DEFINITIONS
IMPORTANT SAFETY INFORMATION
•DialPressureGauge
•On/OffSwitch
•StorageCompartment
•AirAccessoriesInclude:SportsBallNeedle,
Raft & Toy Inflator Nozzles, Presta Valve Adapter
•17.5”AirHose
•9Ft.PowerCordwith12VPowerCord-
Plugsintoany12Vvehiclepoweroutlet:
Input 12V with 15A fuse
OPERATING INSTRUCTIONS - INFLATABLES
INFLATOR DOES NOT WORK WHEN
SWITCHED TO “ON”
•Powercordmaynotbepluggedin
completely. Check the connection.
•Checkvehiclepoweroutletandpower
plug terminals for dirt. Use a non-
conductive probe, not fingers or metal, to
clean.
•Checkvehiclepoweroutletfuse,which
should be a minimum of 15 Amps.
•Fusemayhaveblown.Checkfusein
power plug adaptor and replace if
necessary with one of the same
amperage. NEVER replace a blown fuse
with a fuse having a higher rating.
UNIT IS RUNNING BUT TIRE IS NOT
INFLATING
•Checkthattheairhoseconnectoris
attached properly to the tire valve stem.
•Checkfortireleaksordamage,and
check air hose for breaks and leaks at
fittings.
INFLATOR FEELS HOT OR RUNS
SLOWLY
•Unitmayhaveoverheated.Shuttheunit
off and allow to cool for 20-25 minutes.
•NEVERusethisinflatorformorethan
10 minutes continuously.
•Voltagemaybetoolow.Check
condition of vehicle battery.
TROUBLE SHOOTING
