Loading ...
Loading ...
Loading ...
MAINTENANCE
❇ For detailed information, please
refer to the QR code.
CAUTION
• Turn off the vacuum cleaner before cleaning
it.
• If the dustbin or lter is lled with dust,
the vacuum cleaner may stop to prevent
overheating.
• You should clean the dustbin or lter before
it lls to the MAX line.
Cleaning the dustbin
#18
Dustbin / Metal mesh grille lter
Brush the dust off the metal mesh grille lter
with the combination tool.
❇ Do not pull the rubber attached to the
metal mesh grille lter.
After emptying the dustbin, clean it and dry
in the shade.
❇ When heat is applied, product malformation
may occur.
Cleaning the lter
• To maintain the best performance of
the lter, remove the dust on the lter
frequently and clean the lter with water
once a month.
– After cleaning, dry completely for more
than 24 hours in the shade before use.
– When heat is applied, product
malformation may occur.
#19
Washable micro lter
#20
Fine dust lter
CAUTION
• When assembling, turn the lter until the
line below the lock image is not visible.
Cleaning the accessories
#21
Mini Motorized Tool
#22
Extension Crevice Tool / Pipe
#23
Soft Action Brush
NOTE
• When foreign matter remains on the brush,
remove it with a wet tissue or a dry cloth.
CAUTION
• Do not clean the spinning brush and suction
part with water.
• Do not use the Soft Action Brush to remove
moisture such as spilt liquid or pet’s waste.
#24
Turbo Action Brush
• If the foreign matter is not removed, use
scissors to remove it.
NOTE
• If a cloth or other foreign matter is
vacuumed up and tangled with the spinning
brush, the spinning brush will stop working
to protect the brush motor. After cleaning
the brush, turn the power off and then on
again.
• If a brush does not work after cleaning, turn
the power off and then on again.
• When cleaning the brush, be careful not to
catch your ngers in the fold of the brush.
#25
Wet Brush
NOTE
• If the spinning brush does not work even
after cleaning the Soft Action Brush and Wet
Brush, the overheating prevention device of
the brush motor might be in operation. Wait
30 minutes or more to cool the motor and
operate again.
Maintenance
MAINTENANCE
English
14
1_VS7500_EN_00875B-03_AA.indd 14 2022-07-06 오전 6:34:18
Loading ...
Loading ...
Loading ...