Loading ...
Loading ...
Operation
Starting + Stopping
1. With the water supply turned on and the
nozzle pointed to the car, squeeze the trigger.
To keep the water owing without squeezing,
engage the trigger lock (Fig. 3).
2. To stop, disengage the trigger lock and
release the trigger.
Adjusting Water Flow and
Spray Angle
1. During operation, use the water ow throttle to
adjust the water ow (Fig. 4).
NOTE: The water ow rate can be adjusted
from as low as 2.8 GPM to as high as 3.3
GPM. Generally, with a higher water ow rate
there will be more water released from the
trigger gun. If the foam cannon is used, the
detergent in the bottle will be used up sooner
with a higher water ow setting.
2. When using the spray nozzle tip, the spray
can be adjusted from 0° pencil spray to 65°
fan spray as needed by turning the nozzle tip
(Fig. 5).
Fig. 2
Garden hose
connection
Garden hose
Fig. 3
Squeeze the
trigger
Trigger lock
Fig. 4
Water ow Throttle
Increase
Decrease
Working with Foam Cannon
For additional cleaning power, the unit comes
equipped with a foam cannon spray bottle.
1. Remove the foam cannon cap with detergent
suction tube from the detergent bottle. Fill the
detergent bottle with proper detergent mixed
with water as instructed on the detergent
label/manual (Fig. 6).
2. With the trigger released and the water supply
shut o, disconnect the spray nozzle by
pulling back the Quick-Connect collar (Fig. 7).
NOTE: Do not make change to nozzles when
the sprayer is on.
3. Snap the foam cannon onto the Quick-
Connect collar until it clicks into place (Fig. 8).
Fig. 5
0° Pencil Spray
65° Fan Spray
Fig. 6
Foam cannon
cap with
suction tube
Detergent bottle
Fig. 7
Spray nozzle
Quick-Connect
collar
3
Loading ...
Loading ...
Loading ...